Daily Papers

Data driven robotics relies upon accurate real-world representations to learn useful policies. Despite our best-efforts, zero-shot sim-to-real transfer is still an unsolved problem, and we often need to allow our agents to explore online to learn useful policies for a given task. For many applications of field robotics online exploration is prohibitively expensive and dangerous, this is especially true in fixed-wing aerial robotics. To address these challenges we offer an intermediary solution for learning in field robotics. We investigate the use of dissimilar platform vehicle for learning and offer a procedure to mimic the behavior of one vehicle with another. We specifically consider the problem of training fixed-wing aircraft, an expensive and dangerous vehicle type, using a multi-rotor host platform. Using a Model Predictive Control approach, we design a controller capable of mimicking another vehicles behavior in both simulation and the real-world.

Controlling a robot based on physics-consistent dynamic models, such as Deep Lagrangian Networks (DeLaN), can improve the generalizability and interpretability of the resulting behavior. However, in complex environments, the number of objects to potentially interact with is vast, and their physical properties are often uncertain. This complexity makes it infeasible to employ a single global model. Therefore, we need to resort to online system identification of context-aware models that capture only the currently relevant aspects of the environment. While physical principles such as the conservation of energy may not hold across varying contexts, ensuring physical plausibility for any individual context-aware model can still be highly desirable, particularly when using it for receding horizon control methods such as model predictive control (MPC). Hence, in this work, we extend DeLaN to make it context-aware, combine it with a recurrent network for online system identification, and integrate it with an MPC for adaptive, physics-consistent control. We also combine DeLaN with a residual dynamics model to leverage the fact that a nominal model of the robot is typically available. We evaluate our method on a 7-DOF robot arm for trajectory tracking under varying loads. Our method reduces the end-effector tracking error by 39%, compared to a 21% improvement achieved by a baseline that uses an extended Kalman filter.

Whole-arm manipulation involves direct contact with the environment while the robot completes a task by distributing contact across multiple links as contacts form, slide, and break. This setting breaks common implicit assumptions in many learning-based manipulation pipelines: arm configuration tightly couples motion and contact forces, contact state is partially observed under occlusion, and purely learned rollouts can become physically inconsistent under distribution shift because many multi-link contact configurations are sparsely represented in the data. To address this, we propose TACTIC (Tactile and Vision Conditioned Contact-Centric Control), a receding-horizon controller for whole-arm manipulation. TACTIC uses a contact-centric hybrid predictive model that combines RGB-D, distributed tactile sensing, and a compact 2D proximity representation. The model couples a learned, action-conditioned latent dynamics model with analytical kinematics through contact Jacobians, enabling rollouts of future contact configurations and interaction forces. TACTIC integrates these rollouts into a sampling-based MPC planner with contact-aware action sampling: contact Jacobian-based projections steer sampled action sequences toward force-modulating directions, and objectives defined over predicted proximity and interaction forces trade task progress against whole-arm force regulation. We evaluate TACTIC in simulation against state-of-the-art model-based and model-free methods, and perform ablations that isolate the contribution of each design choice. TACTIC consistently outperforms other methods. We further demonstrate real-world performance on a robot with distributed tactile sensing across three whole-arm manipulation tasks that require multi-contact trajectories: turning over and repositioning a manikin, and goal-reaching in a 3D dynamic maze. Website: https://emprise.cs.cornell.edu/tactic

We present EgoNav, a system that enables a humanoid robot to traverse diverse, unseen environments by learning entirely from 5 hours of human walking data, with no robot data or finetuning. A diffusion model predicts distributions of plausible future trajectories conditioned on past trajectory, a 360 deg visual memory fusing color, depth, and semantics, and video features from a frozen DINOv3 backbone that capture appearance cues invisible to depth sensors. A hybrid sampling scheme achieves real-time inference in 10 denoising steps, and a receding-horizon controller selects paths from the predicted distribution. We validate EgoNav through offline evaluations, where it outperforms baselines in collision avoidance and multi-modal coverage, and through zero-shot deployment on a Unitree G1 humanoid across unseen indoor and outdoor environments. Behaviors such as waiting for doors to open, navigating around crowds, and avoiding glass walls emerge naturally from the learned prior. We will release the dataset and trained models. Our website: https://egonav.weizhuowang.com

This paper introduces Diffusion Policy, a new way of generating robot behavior by representing a robot's visuomotor policy as a conditional denoising diffusion process. We benchmark Diffusion Policy across 11 different tasks from 4 different robot manipulation benchmarks and find that it consistently outperforms existing state-of-the-art robot learning methods with an average improvement of 46.9%. Diffusion Policy learns the gradient of the action-distribution score function and iteratively optimizes with respect to this gradient field during inference via a series of stochastic Langevin dynamics steps. We find that the diffusion formulation yields powerful advantages when used for robot policies, including gracefully handling multimodal action distributions, being suitable for high-dimensional action spaces, and exhibiting impressive training stability. To fully unlock the potential of diffusion models for visuomotor policy learning on physical robots, this paper presents a set of key technical contributions including the incorporation of receding horizon control, visual conditioning, and the time-series diffusion transformer. We hope this work will help motivate a new generation of policy learning techniques that are able to leverage the powerful generative modeling capabilities of diffusion models. Code, data, and training details will be publicly available.

Human-like agents have long been one of the goals in pursuing artificial intelligence. Although reinforcement learning (RL) has achieved superhuman performance in many domains, relatively little attention has been focused on designing human-like RL agents. As a result, many reward-driven RL agents often exhibit unnatural behaviors compared to humans, raising concerns for both interpretability and trustworthiness. To achieve human-like behavior in RL, this paper first formulates human-likeness as trajectory optimization, where the objective is to find an action sequence that closely aligns with human behavior while also maximizing rewards, and adapts the classic receding-horizon control to human-like learning as a tractable and efficient implementation. To achieve this, we introduce Macro Action Quantization (MAQ), a human-like RL framework that distills human demonstrations into macro actions via Vector-Quantized VAE. Experiments on D4RL Adroit benchmarks show that MAQ significantly improves human-likeness, increasing trajectory similarity scores, and achieving the highest human-likeness rankings among all RL agents in the human evaluation study. Our results also demonstrate that MAQ can be easily integrated into various off-the-shelf RL algorithms, opening a promising direction for learning human-like RL agents. Our code is available at https://rlg.iis.sinica.edu.tw/papers/MAQ.

Synthesizing optimal controllers for dynamical systems often involves solving optimization problems with hard real-time constraints. These constraints determine the class of numerical methods that can be applied: computationally expensive but accurate numerical routines are replaced by fast and inaccurate methods, trading inference time for solution accuracy. This paper provides techniques to improve the quality of optimized control policies given a fixed computational budget. We achieve the above via a hypersolvers approach, which hybridizes a differential equation solver and a neural network. The performance is evaluated in direct and receding-horizon optimal control tasks in both low and high dimensions, where the proposed approach shows consistent Pareto improvements in solution accuracy and control performance.

This paper introduces Galactic Bioware's Life Support System, a semi-closed-circuit breathing apparatus designed for integration into a positive-pressure firefighting suit and governed by an AI control system. The breathing loop incorporates a soda lime CO2 scrubber, a silica gel dehumidifier, and pure O2 replenishment with finite consumables. One-way exhaust valves maintain positive pressure while creating a semi-closed system in which outward venting gradually depletes the gas inventory. Part I develops the physicochemical foundations from first principles, including state-consistent thermochemistry, stoichiometric capacity limits, adsorption isotherms, and oxygen-management constraints arising from both fire safety and toxicity. Part II introduces an AI control architecture that fuses three sensor tiers, external environmental sensing, internal suit atmosphere sensing (with triple-redundant O2 cells and median voting), and firefighter biometrics. The controller combines receding-horizon model-predictive control (MPC) with a learned metabolic model and a reinforcement learning (RL) policy advisor, with all candidate actuator commands passing through a final control-barrier-function safety filter before reaching the hardware. This architecture is intended to optimize performance under unknown mission duration and exertion profiles. In this paper we introduce an 18-state, 3-control nonlinear state-space formulation using only sensors viable in structural firefighting, with triple-redundant O2 sensing and median voting. Finally, we introduce an MPC framework with a dynamic resource scarcity multiplier, an RL policy advisor for warm-starting, and a final control-barrier-function safety filter through which all actuator commands must pass, demonstrating 18-34% endurance improvement in simulation over PID baselines while maintaining tighter physiological and fire-safety margins.

This paper proposes a novel aerial reconfigurable intelligent surface (RIS)-aided secure integrated sensing and communication (ISAC) architecture. An unmanned aerial vehicle (UAV)-mounted RIS establishes virtual line-of-sight links to bypass blockages, serving legitimate users while sensing potential eavesdroppers. To ensure communication security and sensing reliability, we formulate an infinite-horizon dynamic control problem maximizing the long-term average system secrecy rate and minimizing UAV flight energy. This formulation jointly optimizes the UAV trajectory, active beamforming with artificial noise (AN) at the base station, and RIS phase shifts, subject to strict radar signal-to-noise ratio and UAV kinematic constraints. Due to the highly coupled non-convex variables, solving this problem directly is intractable. Therefore, we propose an online joint optimization framework based on model predictive control (MPC). Within each receding horizon, alternating optimization is employed to decouple the problem into three subproblems, efficiently solved via successive convex approximation and difference of convex programming. Extensive simulations demonstrate that our MPC-based algorithm significantly outperforms static baselines in secrecy rate, exhibiting superior online correction capability and robustness against environmental perturbations.

Flow-matching vision-language-action (VLA) models generate an action chunk by iteratively denoising Gaussian noise, but typically execute only a short prefix before replanning with updated observations. Under this receding-horizon paradigm, the unexecuted remainder---the action tail---is discarded, and the next chunk is regenerated from fresh noise. We show that this discarded tail retains transferable denoising progress: action-tail initialization can match or outperform a native 10-step Gaussian baseline using fewer denoising steps. However, the optimal denoising budget varies substantially across samples, indicating that tail reuse should be adapted to the updated environment. Based on this observation, we introduce VLA-Rolling, a lightweight inference framework that reuses action tails through three stages: action-tail inheritance, per-action confidence estimation, and confidence-guided refinement through renoising and denoising budget allocation, while the underlying VLA remains frozen. Across π_{0.5}, SmolVLA, X-VLA, and MolmoAct2 on LIBERO, MetaWorld, LIBERO-Plus, and RoboTwin 2.0, VLA-Rolling reduces action-chunk inference cost in all 16 model--benchmark pairs, achieving up to a 1.48times speedup, while improving success rate in 14 pairs by up to 15.08 percentage points. These results show that action tails are not merely discarded predictions, but reusable intermediate states that enable more efficient and accurate VLA inference. These results demonstrate that the action tail can support the generation of better actions with fewer denoising steps. Our project is available at https://chenbao123ww.github.io/VLA-Rolling/.

Co-optimizing safety and performance in large-scale multi-agent systems remains a fundamental challenge. Existing approaches based on multi-agent reinforcement learning (MARL), safety filtering, or Model Predictive Control (MPC) either lack strict safety guarantees, suffer from conservatism, or fail to scale effectively. We propose MAD-PINN, a decentralized physics-informed machine learning framework for solving the multi-agent state-constrained optimal control problem (MASC-OCP). Our method leverages an epigraph-based reformulation of SC-OCP to simultaneously capture performance and safety, and approximates its solution via a physics-informed neural network. Scalability is achieved by training the SC-OCP value function on reduced-agent systems and deploying them in a decentralized fashion, where each agent relies only on local observations of its neighbours for decision-making. To further enhance safety and efficiency, we introduce an Hamilton-Jacobi (HJ) reachability-based neighbour selection strategy to prioritize safety-critical interactions, and a receding-horizon policy execution scheme that adapts to dynamic interactions while reducing computational burden. Experiments on multi-agent navigation tasks demonstrate that MAD-PINN achieves superior safety-performance trade-offs, maintains scalability as the number of agents grows, and consistently outperforms state-of-the-art baselines.

Inverse reinforcement learning (IRL) offers a powerful and general framework for learning humans' latent preferences in route recommendation, yet no approach has successfully addressed planetary-scale problems with hundreds of millions of states and demonstration trajectories. In this paper, we introduce scaling techniques based on graph compression, spatial parallelization, and improved initialization conditions inspired by a connection to eigenvector algorithms. We revisit classic IRL methods in the routing context, and make the key observation that there exists a trade-off between the use of cheap, deterministic planners and expensive yet robust stochastic policies. This insight is leveraged in Receding Horizon Inverse Planning (RHIP), a new generalization of classic IRL algorithms that provides fine-grained control over performance trade-offs via its planning horizon. Our contributions culminate in a policy that achieves a 16-24% improvement in route quality at a global scale, and to the best of our knowledge, represents the largest published study of IRL algorithms in a real-world setting to date. We conclude by conducting an ablation study of key components, presenting negative results from alternative eigenvalue solvers, and identifying opportunities to further improve scalability via IRL-specific batching strategies.

Auto-bidding systems aim to maximize advertiser value over long horizons under budget constraints and ratio targets such as cost-per-acquisition, yet future traffic and auction dynamics are non-stationary and uncertain. Existing approaches face distinct limitations: control-based pacing reacts to deviations but cannot anticipate future conditions, while RL and generative methods fold constraints into reward signals, obscuring violations and degrading under distribution shift. We shift the learning target from actions to responses with the Generative Response Model (GRM), a history-conditioned sequence model that jointly predicts future traffic volume and horizon-aggregate cost/value curves as functions of a single bid multiplier. We show that under mild monotonicity conditions, the optimality gap relative to full per-tick control is bounded by the dispersion of per-tick marginal value-per-cost. Given predicted responses, a lightweight analytic controller enforces each active constraint via a 1D root-finding step. We prove this controller is exact for the single-multiplier problem and bound constraint violations under receding-horizon replanning in terms of prediction error. Experiments on AuctionNet show that GRM improves constraint stability and overall score compared to existing baselines.

Motor control is a fundamental process that underlies all voluntary behavioral responses. Several different theories based on different principles (task dynamics, equilibrium-point theory, passive-motion paradigm, active inference, optimal control) account for specific aspects of how actions are produced, but fail to provide a unified view on this problem. Here we propose a concise theory of motor control based on three principles: optimal feedback control, control with a receding time horizon, and task representation by a series of via-points updated at fixed frequency. By construction, the theory provides a suitable solution to the degrees-of-freedom problem, i.e. trajectory formation in the presence of redundancies and noise. We show through computer simulations that the theory also explains the production of discrete, continuous, rhythmic and temporally-constrained movements, and their parametric and statistical properties (scaling laws, power laws, speed/accuracy tradeoffs). The theory has no free parameters and only limited variations in its implementation details and in the nature of noise are necessary to guarantee its explanatory power.

In distributed model predictive control for multi-drone collision avoidance, a fixed prediction horizon forces a compromise: a short horizon is inexpensive but reacts late to approaching neighbors, whereas a long one anticipates conflicts at a per-step cost that grows superlinearly with its length. We propose a conflict-predictive variable horizon that each drone sets locally, leaving the distributed model predictive control itself unchanged. From a short history of observed positions, a drone extrapolates the flight lines of its neighbors, tests each against its own using confidence funnels that narrow with prediction range, and obtains each time to conflict in closed form. The horizon is then the smallest admissible value whose planning window covers the farthest predicted conflict. It collapses to its minimum in clear airspace and grows only when a conflict lies ahead. Provided this minimum meets a single computable feasibility bound, we prove that recursive feasibility and asymptotic stability are preserved for every horizon the policy can select. These guarantees hold for a linear model, and a cascaded inner loop reduces each quadrotor's translational dynamics to a perturbed double integrator, so they carry over to the linearized quadrotor model and, as practical stability, to the full nonlinear one. In simulation on dense antipodal-swap benchmarks, the variable horizon reduces both per-step solver cost and total computation well below those of a long fixed horizon, and it maintains separation in every run, which a short fixed horizon of comparable per-step cost does not.

The enduring challenge in the field of artificial intelligence has been the control of systems to achieve desired behaviours. While for systems governed by straightforward dynamics equations, methods like Linear Quadratic Regulation (LQR) have historically proven highly effective, most real-world tasks, which require a general problem-solver, demand world models with dynamics that cannot be easily described by simple equations. Consequently, these models must be learned from data using neural networks. Most model predictive control (MPC) algorithms designed for visual world models have traditionally explored gradient-free population-based optimisation methods, such as Cross Entropy and Model Predictive Path Integral (MPPI) for planning. However, we present an exploration of a gradient-based alternative that fully leverages the differentiability of the world model. In our study, we conduct a comparative analysis between our method and other MPC-based alternatives, as well as policy-based algorithms. In a sample-efficient setting, our method achieves on par or superior performance compared to the alternative approaches in most tasks. Additionally, we introduce a hybrid model that combines policy networks and gradient-based MPC, which outperforms pure policy based methods thereby holding promise for Gradient-based planning with world models in complex real-world tasks.

This article investigates data-driven policy iteration (PI) for continuous-time linear systems without requiring an initially stabilizing policy. Standard infinite-horizon PI is not self-starting because its policy-evaluation step is well posed only when the feedback gain is stabilizing. However, verifying this property is difficult when the system matrices are unknown. To remove this requirement, we develop a finite-horizon bootstrap method. The key idea is to perform policy evaluation over a compact interval for a shifted system, where the evaluation equation is well defined for arbitrary bounded time-varying policies. We show that, for a sufficiently long horizon, the initial-time optimal gain of the shifted finite-horizon problem, when applied as a constant feedback gain, achieves a prescribed stability margin for the original system. We then derive a data-driven implementation from an off-policy identity evaluated along trajectories of the original plant. We use basis-function approximations to reconstruct the finite-horizon value matrix and policy, and we characterize the resulting error through a perturbed policy-improvement recursion. A data-driven Lyapunov certificate is further introduced to verify admissibility of the candidate gain before it is used to initialize infinite-horizon PI. Numerical studies of a batch reactor and a two-mass-spring system demonstrate the effectiveness of the proposed bootstrap method.

Diffusion models have become popular for policy learning in robotics due to their ability to capture high-dimensional and multimodal distributions. However, diffusion policies are stochastic and typically trained offline, limiting their ability to handle unseen and dynamic conditions where novel constraints not represented in the training data must be satisfied. To overcome this limitation, we propose diffusion predictive control with constraints (DPCC), an algorithm for diffusion-based control with explicit state and action constraints that can deviate from those in the training data. DPCC incorporates model-based projections into the denoising process of a trained trajectory diffusion model and uses constraint tightening to account for model mismatch. This allows us to generate constraint-satisfying, dynamically feasible, and goal-reaching trajectories for predictive control. We show through simulations of a robot manipulator that DPCC outperforms existing methods in satisfying novel test-time constraints while maintaining performance on the learned control task.

Spacecraft rendezvous on elliptical orbits must hold a safety corridor under navigation noise, unmodelled perturbations, and thrust errors driven by propellant mass uncertainty. This paper develops a tube-based model predictive controller for the Yamanaka-Ankersen linear time-varying dynamics, carrying constraint-tightening tube methods from circular to elliptical orbits. A horizon-dependent, element-wise error bound propagates the actual closed-loop matrices along the prediction window, so early prediction steps keep nearly the full corridor that a constant-width tube would surrender. A multiplicative-to-additive conversion folds mass and thrust uncertainty into the same tightening recursion, and a Perron-Frobenius spectral-radius condition supplies a computable certificate that the tightening converges, with an explicit input-to-state stability gain. In a paired Monte Carlo campaign on a Mars sample-return orbit, the tube controller cuts mean corridor violations by more than an order of magnitude against a nominal predictive baseline at comparable fuel cost. A nonlinear truth-model test with oblateness perturbations well beyond the assumed disturbance budget leaves the corridor unviolated, and when the design envelope is exceeded the tightened problem becomes infeasible and the controller reverts to a saturated linear fallback, making the loss of guarantee explicit rather than silent. The construction requires only element-wise arithmetic and an open-source quadratic-programming solver.

We address the problem of finite-horizon control of a discrete-time linear system, where the initial state distribution follows a Gaussian mixture model, the terminal state must follow a specified Gaussian distribution, and the state and control inputs must obey chance constraints. We show that, throughout the time horizon, the state and control distributions are fully characterized by Gaussian mixtures. We then formulate the cost, distributional terminal constraint, and affine/2-norm chance constraints on the state and control, as convex functions of the decision variables. This is leveraged to formulate the chance-constrained path planning problem as a single convex optimization problem. A numerical example demonstrates the effectiveness of the proposed method.

Data-driven model predictive control has two key advantages over model-free methods: a potential for improved sample efficiency through model learning, and better performance as computational budget for planning increases. However, it is both costly to plan over long horizons and challenging to obtain an accurate model of the environment. In this work, we combine the strengths of model-free and model-based methods. We use a learned task-oriented latent dynamics model for local trajectory optimization over a short horizon, and use a learned terminal value function to estimate long-term return, both of which are learned jointly by temporal difference learning. Our method, TD-MPC, achieves superior sample efficiency and asymptotic performance over prior work on both state and image-based continuous control tasks from DMControl and Meta-World. Code and video results are available at https://nicklashansen.github.io/td-mpc.

In this paper, we provide a theoretical analysis of the closed-loop properties of a data-driven kernel-based predictive control (DDKPC) scheme developed solely from input-output data. The proposed formulation integrates a robust data-driven predictive control framework with a multi-step predictor for nonlinear systems constructed via kernel-based methods. This predictor implicitly captures the system's nonlinear behavior using the representer theorem. For the nominal case with noise-free data, we prove that the DDKPC scheme guarantees recursive feasibility and closed-loop stability, provided that the prediction horizon is sufficiently long and the kernel representation error is sufficiently small. To facilitate real-time implementation, we introduce a penalty relaxation formulation to alleviate the computational burden inherently caused by nonconvex implicit constraints. Furthermore, the framework is robustified against measurement noise by aggregating the representation mismatch and the bounded noise into a unified uncertainty bound. Finally, we extend the DDKPC framework to slowly time-varying nonlinear systems by periodically reconstructing the kernel predictor from a fixed-budget online dictionary managed by the approximate linear dependency (ALD) criterion. Under suitable conditions on the rate of variation of the input-output evolution and the online prediction error, recursive feasibility and practical closed-loop stability are preserved. The effectiveness of the proposed approach is illustrated through numerical examples.

World models paired with model predictive control (MPC) can be trained offline on large-scale datasets of expert trajectories and enable generalization to a wide range of planning tasks at inference time. Compared to traditional MPC procedures, which rely on slow search algorithms or on iteratively solving optimization problems exactly, gradient-based planning offers a computationally efficient alternative. However, the performance of gradient-based planning has thus far lagged behind that of other approaches. In this paper, we propose improved methods for training world models that enable efficient gradient-based planning. We begin with the observation that although a world model is trained on a next-state prediction objective, it is used at test-time to instead estimate a sequence of actions. The goal of our work is to close this train-test gap. To that end, we propose train-time data synthesis techniques that enable significantly improved gradient-based planning with existing world models. At test time, our approach outperforms or matches the classical gradient-free cross-entropy method (CEM) across a variety of object manipulation and navigation tasks in 10% of the time budget.

In this work, we consider the problem of deriving and incorporating accurate dynamic models for model predictive control (MPC) with an application to quadrotor control. MPC relies on precise dynamic models to achieve the desired closed-loop performance. However, the presence of uncertainties in complex systems and the environments they operate in poses a challenge in obtaining sufficiently accurate representations of the system dynamics. In this work, we make use of a deep learning tool, knowledge-based neural ordinary differential equations (KNODE), to augment a model obtained from first principles. The resulting hybrid model encompasses both a nominal first-principle model and a neural network learnt from simulated or real-world experimental data. Using a quadrotor, we benchmark our hybrid model against a state-of-the-art Gaussian Process (GP) model and show that the hybrid model provides more accurate predictions of the quadrotor dynamics and is able to generalize beyond the training data. To improve closed-loop performance, the hybrid model is integrated into a novel MPC framework, known as KNODE-MPC. Results show that the integrated framework achieves 60.2% improvement in simulations and more than 21% in physical experiments, in terms of trajectory tracking performance.

Learning predictive world models from raw visual observations is a central challenge in reinforcement learning (RL), especially for robotics and continuous control. Conventional model-based RL frameworks directly condition future predictions on absolute actions, which makes optimization unstable: the optimal action distributions are task-dependent, unknown a priori, and often lead to oscillatory or inefficient control. To address this, we introduce the Residual-Action World Model (ResWM), a new framework that reformulates the control variable from absolute actions to residual actions -- incremental adjustments relative to the previous step. This design aligns with the inherent smoothness of real-world control, reduces the effective search space, and stabilizes long-horizon planning. To further strengthen the representation, we propose an Observation Difference Encoder that explicitly models the changes between adjacent frames, yielding compact latent dynamics that are naturally coupled with residual actions. ResWM is integrated into a Dreamer-style latent dynamics model with minimal modifications and no extra hyperparameters. Both imagination rollouts and policy optimization are conducted in the residual-action space, enabling smoother exploration, lower control variance, and more reliable planning. Empirical results on the DeepMind Control Suite demonstrate that ResWM achieves consistent improvements in sample efficiency, asymptotic returns, and control smoothness, significantly surpassing strong baselines such as Dreamer and TD-MPC. Beyond performance, ResWM produces more stable and energy-efficient action trajectories, a property critical for robotic systems deployed in real-world environments. These findings suggest that residual action modeling provides a simple yet powerful principle for bridging algorithmic advances in RL with the practical requirements of robotics.

Model predictive control (MPC) with learned world models has emerged as a promising paradigm for embodied control, particularly for its ability to generalize zero-shot when deployed in new environments. However, learned world models often struggle with long-horizon control due to the accumulation of prediction errors and the exponentially growing search space. In this work, we address these challenges by learning latent world models at multiple temporal scales and performing hierarchical planning across these scales, enabling long-horizon reasoning while substantially reducing inference-time planning complexity. Our approach serves as a modular planning abstraction that applies across diverse latent world-model architectures and domains. We demonstrate that this hierarchical approach enables zero-shot control on real-world non-greedy robotic tasks, achieving a 70% success rate on pick-&-place using only a final goal specification, compared to 0% for a single-level world model. In addition, across physics-based simulated environments including push manipulation and maze navigation, hierarchical planning achieves higher success while requiring up to 4x less planning-time compute.

Hybrid systems are prevalent in robotics. However, ensuring the stability of hybrid systems is challenging due to sophisticated continuous and discrete dynamics. A system with all its system modes stable can still be unstable. Hence special treatments are required at mode switchings to stabilize the system. In this work, we propose a hierarchical, neural network (NN)-based method to control general hybrid systems. For each system mode, we first learn an NN Lyapunov function and an NN controller to ensure the states within the region of attraction (RoA) can be stabilized. Then an RoA NN estimator is learned across different modes. Upon mode switching, we propose a differentiable planner to ensure the states after switching can land in next mode's RoA, hence stabilizing the hybrid system. We provide novel theoretical stability guarantees and conduct experiments in car tracking control, pogobot navigation, and bipedal walker locomotion. Our method only requires 0.25X of the training time as needed by other learning-based methods. With low running time (10-50X faster than model predictive control (MPC)), our controller achieves a higher stability/success rate over other baselines such as MPC, reinforcement learning (RL), common Lyapunov methods (CLF), linear quadratic regulator (LQR), quadratic programming (QP) and Hamilton-Jacobian-based methods (HJB). The project page is on https://mit-realm.github.io/hybrid-clf.

In this paper, we introduce a new class of parameterized controllers, drawing inspiration from Model Predictive Control (MPC). The controller resembles a Quadratic Programming (QP) solver of a linear MPC problem, with the parameters of the controller being trained via Deep Reinforcement Learning (DRL) rather than derived from system models. This approach addresses the limitations of common controllers with Multi-Layer Perceptron (MLP) or other general neural network architecture used in DRL, in terms of verifiability and performance guarantees, and the learned controllers possess verifiable properties like persistent feasibility and asymptotic stability akin to MPC. On the other hand, numerical examples illustrate that the proposed controller empirically matches MPC and MLP controllers in terms of control performance and has superior robustness against modeling uncertainty and noises. Furthermore, the proposed controller is significantly more computationally efficient compared to MPC and requires fewer parameters to learn than MLP controllers. Real-world experiments on vehicle drift maneuvering task demonstrate the potential of these controllers for robotics and other demanding control tasks.

Long-horizon manipulation remains challenging for vision-language-action (VLA) policies: real tasks are multi-step, progress-dependent, and brittle to compounding execution errors. We present LoHo-Manip, a modular framework that scales short-horizon VLA execution to long-horizon instruction following via a dedicated task-management VLM. The manager is decoupled from the executor and is invoked in a receding-horizon manner: given the current observation, it predicts a progress-aware remaining plan that combines (i) a subtask sequence with an explicit done + remaining split as lightweight language memory, and (ii) a visual trace -- a compact 2D keypoint trajectory prompt specifying where to go and what to approach next. The executor VLA is adapted to condition on the rendered trace, thereby turning long-horizon decision-making into repeated local control by following the trace. Crucially, predicting the remaining plan at each step yields an implicit closed loop: failed steps persist in subsequent outputs, and traces update accordingly, enabling automatic continuation and replanning without hand-crafted recovery logic or brittle visual-history buffers. Extensive experiments spanning embodied planning, long-horizon reasoning, trajectory prediction, and end-to-end manipulation in simulation and on a real Franka robot demonstrate strong gains in long-horizon success, robustness, and out-of-distribution generalization. Project page: https://www.liuisabella.com/LoHoManip

Model Predictive Control (MPC) has been demonstrated to be effective in continuous control tasks. When a world model and a value function are available, planning a sequence of actions ahead of time leads to a better policy. Existing methods typically obtain the value function and the corresponding policy in a model-free manner. However, we find that such an approach struggles with complex tasks, resulting in poor policy learning and inaccurate value estimation. To address this problem, we leverage the strengths of MPC itself. In this work, we introduce Bootstrapped Model Predictive Control (BMPC), a novel algorithm that performs policy learning in a bootstrapped manner. BMPC learns a network policy by imitating an MPC expert, and in turn, uses this policy to guide the MPC process. Combined with model-based TD-learning, our policy learning yields better value estimation and further boosts the efficiency of MPC. We also introduce a lazy reanalyze mechanism, which enables computationally efficient imitation learning. Our method achieves superior performance over prior works on diverse continuous control tasks. In particular, on challenging high-dimensional locomotion tasks, BMPC significantly improves data efficiency while also enhancing asymptotic performance and training stability, with comparable training time and smaller network sizes. Code is available at https://github.com/wertyuilife2/bmpc.

Model-predictive control (MPC) is a powerful framework for controlling dynamic systems under constraints, but it remains challenging to deploy on resource-constrained platforms, especially for problems involving conic constraints. To address this, we extend recent work developing fast, structure-exploiting, cached ADMM solvers for embedded applications, to provide support for second-order cones, as well as C++ code generation from Python, MATLAB, and Julia for easy deployment. Microcontroller benchmarks show that our solver provides up to a two-order-of-magnitude speedup, ranging from 10.6x to 142.7x, over state-of-the-art embedded solvers on QP and SOCP problems, and enables us to fit order-of-magnitude larger problems in memory. We validate our solver's deployed performance through simulation and hardware experiments, including conically-constrained trajectory tracking on a 27g Crazyflie quadrotor. To get started with Conic-TinyMPC, visit our documentation, examples, and the open-source codebase at https://tinympc.org.

In this paper, a safe and learning-based control framework for model predictive control (MPC) is proposed to optimize nonlinear systems with a non-differentiable objective function under uncertain environmental disturbances. The control framework integrates a learning-based MPC with an auxiliary controller in a way of minimal intervention. The learning-based MPC augments the prior nominal model with incremental Gaussian Processes to learn the uncertain disturbances. The cross-entropy method (CEM) is utilized as the sampling-based optimizer for the MPC with a non-differentiable objective function. A minimal intervention controller is devised with a control Lyapunov function and a control barrier function to guide the sampling process and endow the system with high probabilistic safety. The proposed algorithm shows a safe and adaptive control performance on a simulated quadrotor in the tasks of trajectory tracking and obstacle avoidance under uncertain wind disturbances.

We investigate model predictive control (MPC) formulations for linear systems subject to i.i.d. stochastic disturbances with bounded support and chance constraints. Existing stochastic MPC formulations with closed-loop guarantees can be broadly classified in two separate frameworks: i) using robust techniques; ii) feasibility preserving algorithms. We investigate two particular MPC formulations representative for these two frameworks called robust-stochastic MPC and indirect feedback stochastic MPC. We provide a qualitative analysis, highlighting intrinsic limitations of both approaches in different edge cases. Then, we derive a unifying stochastic MPC framework that naturally includes these two formulations as limit cases. This qualitative analysis is complemented with numerical results, showcasing the advantages and limitations of each method.

This letter presents an analytical linear parameter-varying (LPV) representation of quadrotor dynamics utilizing Koopman theory, facilitating computationally efficient linear model predictive control (LMPC) for real-time trajectory tracking. By leveraging carefully designed Koopman observables, the proposed approach enables a compact lifted-space evolution that mitigates the curse of dimensionality while preserving the nonlinear characteristics of the system. Although model predictive control (MPC) is a powerful strategy for quadrotor control, it faces a trade-off between the high computational cost of nonlinear MPC (NMPC) and the reduced accuracy of LMPC. To address this gap, we introduce KQ-LMPC (Koopman Quasilinear LPV MPC), which leverages the Koopman-lifted LPV formulation to enforce constraints, ensure lower computational burden and real-time feasibility, and deliver tracking performance comparable to NMPC. Experimental validation confirms the effectiveness of the framework in reasonably agile flight. To the best of our knowledge, this is the first experimentally validated LMPC for quadrotors that employs analytically derived Koopman observables without requiring training data.

Managing drawdown, the peak-to-trough decline in an investment portfolio's value, is a precondition for long-term survival in practical investment management. However, mainstream stock forecasting methods predominantly optimize returns or Sharpe ratios under the independent and identically distributed (i.i.d.) assumption. Real markets do not follow this assumption, triggering catastrophic drawdowns. We propose a cross-asset state-space trading system (CAST), consisting of two components: The predictor, Cross-Asset Collaborative Kalman Filter (CoKF), estimates each asset's latent state online, coupling all assets through their correlations and adaptively fusing multiple integrated-random-walk orders. The controller, Model Predictive Control (MPC), converts the predictor's forecast into trades, using forecast uncertainty as an explicit risk penalty that controls drawdown. We evaluate CAST on four real-world stock markets over a 15-year test window and show that it consistently occupies the return-drawdown Pareto frontier, achieving strong risk-adjusted performance while maintaining substantially lower maximum drawdown than competitive baselines. A stress test across crisis periods further demonstrates robust behavior under market shocks and distribution shift. Because the predictor and controller interact only through the predicted price path, both are plug-and-play, making CAST a modular, interpretable trading system. The code is available at https://github.com/FanBroWell/CAST

We tackle the challenge of large-scale network intervention for guiding excitatory point processes, such as infectious disease spread or traffic congestion control. Our model-based reinforcement learning utilizes neural ODEs to capture how the networked excitatory point processes will evolve subject to the time-varying changes in network topology. Our approach incorporates Gradient-Descent based Model Predictive Control (GD-MPC), offering policy flexibility to accommodate prior knowledge and constraints. To address the intricacies of planning and overcome the high dimensionality inherent to such decision-making problems, we design an Amortize Network Interventions (ANI) framework, allowing for the pooling of optimal policies from history and other contexts, while ensuring a permutation equivalent property. This property enables efficient knowledge transfer and sharing across diverse contexts. Our approach has broad applications, from curbing infectious disease spread to reducing carbon emissions through traffic light optimization, and thus has the potential to address critical societal and environmental challenges.

Controlling the evolution of complex physical systems is a fundamental task across science and engineering. Classical techniques suffer from limited applicability or huge computational costs. On the other hand, recent deep learning and reinforcement learning-based approaches often struggle to optimize long-term control sequences under the constraints of system dynamics. In this work, we introduce Diffusion Physical systems Control (DiffPhyCon), a new class of method to address the physical systems control problem. DiffPhyCon excels by simultaneously minimizing both the learned generative energy function and the predefined control objectives across the entire trajectory and control sequence. Thus, it can explore globally and plan near-optimal control sequences. Moreover, we enhance DiffPhyCon with prior reweighting, enabling the discovery of control sequences that significantly deviate from the training distribution. We test our method on three tasks: 1D Burgers' equation, 2D jellyfish movement control, and 2D high-dimensional smoke control, where our generated jellyfish dataset is released as a benchmark for complex physical system control research. Our method outperforms widely applied classical approaches and state-of-the-art deep learning and reinforcement learning methods. Notably, DiffPhyCon unveils an intriguing fast-close-slow-open pattern observed in the jellyfish, aligning with established findings in the field of fluid dynamics. The project website, jellyfish dataset, and code can be found at https://github.com/AI4Science-WestlakeU/diffphycon.

Connected and automated vehicles demand lateral controllers that are simultaneously accurate, low-effort, and safe under model error and sensor noise. Modular controllers such as model predictive control (MPC) are interpretable and constraint-aware but rely on accurate models and hand-tuned weights. End-to-end learned policies, in particular continuous-action deep reinforcement learning, are adaptable and require no hand-designed control law, but offer no intrinsic safety guarantees and limited interpretability. This paper presents a hybrid architecture that combines an end-to-end Soft Actor-Critic (SAC) policy with a constrained linear MPC into a single steering command, using the MPC's first-step optimum as the model-based anchor and a single monotone blending coefficient that interpolates between the two paradigms. The architecture is evaluated on a linearized lateral bicycle model against a PID baseline, a tuned linear MPC, and a stand-alone SAC policy, across nominal, single-axis robustness, and multi-initial-condition ensemble experiments. The hybrid retains the tracking quality of stand-alone SAC while remaining inside the MPC's actuator envelope and preserving a deterministic, model-based contribution to every steering command. The architecture provides an actuator-envelope guarantee by construction but does not establish recursive feasibility or terminal invariance, and the closed-form blend does not prevent all corner-case divergences at the boundary of the training distribution. A corner-case analysis shows that the blend attenuates but cannot prevent failure under distribution shift, motivating a connectivity-aware extension in which the blending coefficient is scheduled by vehicle-to-everything (V2X) signals to restore model-based authority. Limitations and a path toward a constrained-QP predictive safety filter are discussed.

Harmonic model predictive control (HMPC) is a recent model predictive control (MPC) formulation for tracking piece-wise constant references that includes a parameterized artificial harmonic reference as a decision variable, resulting in an increased performance and domain of attraction with respect to other MPC formulations. This article presents an extension of the HMPC formulation to track periodic harmonic/sinusoidal references and discusses its use for tracking arbitrary trajectories. The proposed formulation inherits the benefits of its predecessor, namely its good performance and large domain of attraction when using small prediction horizons, and that the complexity of its optimization problem does not depend on the period of the reference. We show closed-loop results discussing its performance and comparing it to other MPC formulations.

We provide an algorithm for adaptive legged locomotion via online learning and model predictive control. The algorithm is composed of two interacting modules: model predictive control (MPC) and online learning of residual dynamics. The residual dynamics can represent modeling errors and external disturbances. We are motivated by the future of autonomy where quadrupeds will autonomously perform complex tasks despite real-world unknown uncertainty, such as unknown payload and uneven terrains. The algorithm uses random Fourier features to approximate the residual dynamics in reproducing kernel Hilbert spaces. Then, it employs MPC based on the current learned model of the residual dynamics. The model is updated online in a self-supervised manner using least squares based on the data collected while controlling the quadruped. The algorithm enjoys sublinear dynamic regret, defined as the suboptimality against an optimal clairvoyant controller that knows how the residual dynamics. We validate our algorithm in Gazebo and MuJoCo simulations, where the quadruped aims to track reference trajectories. The Gazebo simulations include constant unknown external forces up to 12g, where g is the gravity vector, in flat terrain, slope terrain with 20degree inclination, and rough terrain with 0.25m height variation. The MuJoCo simulations include time-varying unknown disturbances with payload up to 8~kg and time-varying ground friction coefficients in flat terrain.

We develop a learning-based framework for constructing shrinking disturbance-invariant tubes under state- and input-dependent uncertainty, intended as a building block for tube Model Predictive Control (MPC), and certify safety via a lifted, isotone (order-preserving) fixed-point map. Gaussian Process (GP) posteriors become (1-α) credible ellipsoids, then polytopic outer sets for deterministic set operations. A two-time-scale scheme separates learning epochs, where these polytopes are frozen, from an inner, outside-in iteration that converges to a compact fixed point Z^star!subseteq!mathcal G; its state projection is RPI for the plant. As data accumulate, disturbance polytopes tighten, and the associated tubes nest monotonically, resolving the circular dependence between the set to be verified and the disturbance model while preserving hard constraints. A double-integrator study illustrates shrinking tube cross-sections in data-rich regions while maintaining invariance.

Generative models transform random noise into images; their inversion aims to transform images back to structured noise for recovery and editing. This paper addresses two key tasks: (i) inversion and (ii) editing of a real image using stochastic equivalents of rectified flow models (such as Flux). Although Diffusion Models (DMs) have recently dominated the field of generative modeling for images, their inversion presents faithfulness and editability challenges due to nonlinearities in drift and diffusion. Existing state-of-the-art DM inversion approaches rely on training of additional parameters or test-time optimization of latent variables; both are expensive in practice. Rectified Flows (RFs) offer a promising alternative to diffusion models, yet their inversion has been underexplored. We propose RF inversion using dynamic optimal control derived via a linear quadratic regulator. We prove that the resulting vector field is equivalent to a rectified stochastic differential equation. Additionally, we extend our framework to design a stochastic sampler for Flux. Our inversion method allows for state-of-the-art performance in zero-shot inversion and editing, outperforming prior works in stroke-to-image synthesis and semantic image editing, with large-scale human evaluations confirming user preference.

We study diffusion-based model predictive control (Diffusion-MPC) in discrete combinatorial domains using Tetris as a case study. Our planner samples candidate placement sequences with a MaskGIT-style discrete denoiser and selects actions via reranking. We analyze three key factors: (1) feasibility-constrained sampling via logit masking over valid placements, (2) reranking strategies using a heuristic score, a pretrained DQN critic, and a hybrid combination, and (3) compute scaling in candidate count and planning horizon. We find that feasibility masking is necessary in discrete domains, removing invalid action mass (46%) and yielding a 6.8% improvement in score and 5.6% improvement in survival over unconstrained sampling. Naive DQN reranking is systematically misaligned with rollout quality, producing high decision regret (mean 17.6, p90 36.6). Shorter planning horizons outperform longer ones under sparse and delayed rewards, suggesting uncertainty compounding in long imagined rollouts. Overall, compute choices (K, H) determine dominant failure modes: small K limits candidate quality, while larger H amplifies misranking and model mismatch. Our findings highlight structural challenges of diffusion planners in discrete environments and provide practical diagnostics for critic integration.

Classifier-Free Guidance (CFG) has emerged as a central approach for enhancing semantic alignment in flow-based diffusion models. In this paper, we explore a unified framework called CFG-Ctrl, which reinterprets CFG as a control applied to the first-order continuous-time generative flow, using the conditional-unconditional discrepancy as an error signal to adjust the velocity field. From this perspective, we summarize vanilla CFG as a proportional controller (P-control) with fixed gain, and typical follow-up variants develop extended control-law designs derived from it. However, existing methods mainly rely on linear control, inherently leading to instability, overshooting, and degraded semantic fidelity especially on large guidance scales. To address this, we introduce Sliding Mode Control CFG (SMC-CFG), which enforces the generative flow toward a rapidly convergent sliding manifold. Specifically, we define an exponential sliding mode surface over the semantic prediction error and introduce a switching control term to establish nonlinear feedback-guided correction. Moreover, we provide a Lyapunov stability analysis to theoretically support finite-time convergence. Experiments across text-to-image generation models including Stable Diffusion 3.5, Flux, and Qwen-Image demonstrate that SMC-CFG outperforms standard CFG in semantic alignment and enhances robustness across a wide range of guidance scales. Project Page: https://hanyang-21.github.io/CFG-Ctrl

Learning predictive models from observations using deep neural networks (DNNs) is a promising new approach to many real-world planning and control problems. However, common DNNs are too unstructured for effective planning, and current control methods typically rely on extensive sampling or local gradient descent. In this paper, we propose a new framework for integrated model learning and predictive control that is amenable to efficient optimization algorithms. Specifically, we start with a ReLU neural model of the system dynamics and, with minimal losses in prediction accuracy, we gradually sparsify it by removing redundant neurons. This discrete sparsification process is approximated as a continuous problem, enabling an end-to-end optimization of both the model architecture and the weight parameters. The sparsified model is subsequently used by a mixed-integer predictive controller, which represents the neuron activations as binary variables and employs efficient branch-and-bound algorithms. Our framework is applicable to a wide variety of DNNs, from simple multilayer perceptrons to complex graph neural dynamics. It can efficiently handle tasks involving complicated contact dynamics, such as object pushing, compositional object sorting, and manipulation of deformable objects. Numerical and hardware experiments show that, despite the aggressive sparsification, our framework can deliver better closed-loop performance than existing state-of-the-art methods.

Multi-turn long-horizon planning is critical for foundation model agents, yet how to fundamentally improve it remains unclear. Existing models are trained on uncontrollable and opaque Internet data, making it difficult to identify how planning ability is acquired, shaped, and integrated. To address this challenge, we introduce a unified and controlled multi-turn environment that enables precise control. It allows systematically study long-horizon planning across three stages. (1) Planning ability acquisition during pre-training. We study data format, distribution, and quality. Explicit world model construction through CoT state transition modeling yields stronger long-horizon generalization. Atomic skills alone are insufficient for compositional generalization, whereas a litte long-horizon data works. Moreover, suboptimal trajectories severely impair performance because errors amplify over long horizons. (2) Planning ability shaping via GRPO and OPD post-training. Through mutual information, we distinguish general planning patterns from task-specific planning knowledge. For planning patterns, we identify three application regions of post-training: unnecessary, effective, and unsupported. OPD has a broader effective region than GRPO under low-quality and long-horizon settings, as it provides more consistent update directions. For planning knowledge, distilling unseen procedures from a teacher with different knowledge may impair student's prior world modeling without fully establishing new knowledge. (3) Planning ability integration through MOPD post-training. We show that multi-teacher on-policy distillation (MOPD) integrates capabilities by converging to shared planning-pattern across environments. Compatible patterns enable cross-environment generalization, partially shared patterns support continual learning, while completely conflicting patterns cause severe interference.

Model-predictive control (MPC) is a powerful tool for controlling highly dynamic robotic systems subject to complex constraints. However, MPC is computationally demanding, and is often impractical to implement on small, resource-constrained robotic platforms. We present TinyMPC, a high-speed MPC solver with a low memory footprint targeting the microcontrollers common on small robots. Our approach is based on the alternating direction method of multipliers (ADMM) and leverages the structure of the MPC problem for efficiency. We demonstrate TinyMPC's effectiveness by benchmarking against the state-of-the-art solver OSQP, achieving nearly an order of magnitude speed increase, as well as through hardware experiments on a 27 gram quadrotor, demonstrating high-speed trajectory tracking and dynamic obstacle avoidance. TinyMPC is publicly available at https://tinympc.org.

Learning long-horizon tasks such as navigation has presented difficult challenges for successfully applying reinforcement learning to robotics. From another perspective, under known environments, sampling-based planning can robustly find collision-free paths in environments without learning. In this work, we propose Control Transformer that models return-conditioned sequences from low-level policies guided by a sampling-based Probabilistic Roadmap (PRM) planner. We demonstrate that our framework can solve long-horizon navigation tasks using only local information. We evaluate our approach on partially-observed maze navigation with MuJoCo robots, including Ant, Point, and Humanoid. We show that Control Transformer can successfully navigate through mazes and transfer to unknown environments. Additionally, we apply our method to a differential drive robot (Turtlebot3) and show zero-shot sim2real transfer under noisy observations.

We introduce Riemannian Lyapunov Optimizers (RLOs), a family of optimization algorithms that unifies classic optimizers within one geometric framework. Unlike heuristic improvements to existing optimizers, RLOs are systematically derived from a novel control-theoretic framework that reinterprets optimization as an extended state discrete-time controlled dynamical system on a Riemannian parameter manifold. Central to this framework is the identification of a Normally Attracting Invariant Manifold (NAIM), which organizes training dynamics into two distinct stages: rapid alignment of the speed state to a target graph, followed by controlled evolution within it. We formalize this by constructing a strict Lyapunov function that certifies convergence to a target manifold. This perspective yields a constructive ``optimizer generator" that not only recovers classic algorithms but enables the principled design of RLOs. We validate our theory via geometric diagnostics and demonstrate that grounding optimizer design in control theory yields state-of-the-art performance in large-scale benchmarks. Overall, RLOs bridge control theory and modern machine learning optimization, providing a unified language and a systematic toolkit for designing stable, effective optimizers.

This paper presents a continuous-time optimal control framework for the generation of reference trajectories in driving scenarios with uncertainty. A previous work presented a discrete-time stochastic generator for autonomous vehicles; those results are extended to continuous time to ensure the robustness of the generator in a real-time setting. We show that the stochastic model in continuous time can capture the uncertainty of information by producing better results, limiting the risk of violating the problem's constraints compared to a discrete approach. Dynamic solvers provide faster computation and the continuous-time model is more robust to a wider variety of driving scenarios than the discrete-time model, as it can handle further time horizons, which allows trajectory planning outside the framework of urban driving scenarios.

We present a numerical framework to treat infinite time horizon spatially distributed optimal control problems via the associated canonical system derived by Pontryagin's Maximum Principle. The basic idea is to consider the canonical system in two steps. First we perform a bifurcation analysis of canonical steady states using the continuation and bifurcation package pde2path, yielding a number of so called flat and patterned canonical steady states. In a second step we link pde2path to the two point boundary value problem solver TOM to study time dependent canonical paths to steady states having the so called saddle point property. As an example we consider a shallow lake model with diffusion.

World models must predict how an environment evolves under sequences of actions, enabling agents to compare possible futures and reason about counterfactual actions before acting. Long-horizon prediction is commonly obtained by recursively applying a one-step transition model, but intermediate errors can compound over time. Multi-step dynamics models instead condition on a sequence of future actions and predict their consequences directly, but become harder to learn as horizon grows: the model must track interacting state changes across the trajectory, endpoint supervision provides weak credit assignment, and intermediate predictions can remain plausible while losing information needed for later states. We show that these challenges can be addressed by casting the internal evolution of a multi-step transition as structured reasoning over textual world states: reasoning over sparse state changes reduces the burden of state tracking, a predictive-gain objective rewards the learned state for improving over a matched predictor that conditions on raw history instead, and intermediate predictive rewards supervise each state along the trajectory. Because these intermediate states are explicit textual representations of the world, they provide semantically meaningful targets that can be inspected, scored, and corrected during training. Across ScienceWorld, Jericho, and CEO-Bench, our approach achieves the strongest average long-horizon performance against recursive and non-recursive baselines that condition directly on raw history, with gains increasing at longer horizons. In a controlled counterfactual study, our model is also the only one with statistically significant sensitivity to future actions.

Deep Research agents rely on long-horizon reasoning and iterative tool use to solve complex information-seeking tasks. However, adaptive decision-making over these trajectories remains challenging, as agents may stop prematurely when further evidence is needed, continue unnecessarily after sufficient evidence has been gathered, or fail to redirect unproductive trajectories. Existing solutions either require costly model retraining and dense turn-level supervision, or rely on heuristic control rules that are not directly optimized for downstream research utility. This motivates a lightweight, utility-aware alternative for Deep Research control. We formulate adaptive rerouting in long-horizon Deep Research as a state-conditioned trajectory correction problem. Based on this view, we introduce RIVO, a lightweight plug-in framework for adaptive trajectory correction. The agent estimates its research state from lightweight signals and determines whether trajectory redirection is needed. Once triggered, the plug-in modifies the Host token logits to steer generation toward a more promising research direction. Theoretical analysis shows that, under a value-alignment condition and bounded local curvature, a sufficiently small logit intervention can locally improve expected downstream research utility. We further construct BrowseCore, a curated dataset with a paired local corpus, for efficient and controlled Deep Research experimentation. Building on this resource, the plug-in is trained from downstream outcomes, enabling it to learn corrections that improve subsequent research and final task performance. Extensive experiments across multiple Deep Research benchmarks and control settings demonstrate the effectiveness of our method, showing that lightweight logit intervention can improve long-horizon research without retraining the underlying Host model.

A common pipeline in learning-based control is to iteratively estimate a model of system dynamics, and apply a trajectory optimization algorithm - e.g.~iLQR - on the learned model to minimize a target cost. This paper conducts a rigorous analysis of a simplified variant of this strategy for general nonlinear systems. We analyze an algorithm which iterates between estimating local linear models of nonlinear system dynamics and performing iLQR-like policy updates. We demonstrate that this algorithm attains sample complexity polynomial in relevant problem parameters, and, by synthesizing locally stabilizing gains, overcomes exponential dependence in problem horizon. Experimental results validate the performance of our algorithm, and compare to natural deep-learning baselines.

We study spectral approximations of the dynamic programming semigroup for finite-horizon optimal control on a connected compact Lie group G, and of the associated first-order Hamilton-Jacobi-Bellman equation. The Bellman operator is monotone and non-expansive in the supremum norm, while the Peter-Weyl decomposition of L^{2}(G), on which every Fourier method on G rests, is orthogonal, and the mismatch is quantitative. The natural sup-norm error recursion of the Galerkin iteration is amplified at every step by the Lebesgue constant of the spectral projection, which grows logarithmically on S^{1} and polynomially on compact Lie groups of rank one, including SO(3), and in computation the iteration violates elementary bounds within a few steps. We restore the dynamic programming structure at the discrete level by replacing the orthogonal projection with spectral filters of Markov type. An auxiliary heat-kernel/vanishing-viscosity scheme yields qualitative sup-norm convergence for Lipschitz data. The main result is a Fejér-type filter on G, finite-rank, positivity preserving and non-expansive, together with a convergence theorem at the rate O(sqrtδ+ε+1/(δN^2)) for Lipschitz data, where δ is the time step, N the spectral resolution and ε the viscosity. The viscosity may be zero, and the coupling δ=N^{-1} then gives the rate N^{-1/2}. The proof interprets the filter as a small random perturbation of the controlled dynamics, requires neither a priori regularity of the value function nor a consistency argument in the viscosity sense for the filtering step, and extends to a fully discrete realization based on positive cubature, with exact Wigner transport on SO(3). Numerical experiments confirm the predicted rates and filter bias and quantify the frame dependence of two chart-based baselines.

We present Kinodynamic RRT*, an incremental sampling-based approach for asymptotically optimal motion planning for robots with linear differential constraints. Our approach extends RRT*, which was introduced for holonomic robots (Karaman et al. 2011), by using a fixed-final-state-free-final-time controller that exactly and optimally connects any pair of states, where the cost function is expressed as a trade-off between the duration of a trajectory and the expended control effort. Our approach generalizes earlier work on extending RRT* to kinodynamic systems, as it guarantees asymptotic optimality for any system with controllable linear dynamics, in state spaces of any dimension. Our approach can be applied to non-linear dynamics as well by using their first-order Taylor approximations. In addition, we show that for the rich subclass of systems with a nilpotent dynamics matrix, closed-form solutions for optimal trajectories can be derived, which keeps the computational overhead of our algorithm compared to traditional RRT* at a minimum. We demonstrate the potential of our approach by computing asymptotically optimal trajectories in three challenging motion planning scenarios: (i) a planar robot with a 4-D state space and double integrator dynamics, (ii) an aerial vehicle with a 10-D state space and linearized quadrotor dynamics, and (iii) a car-like robot with a 5-D state space and non-linear dynamics.

We present a data-driven control framework for partial differential equations (PDEs). Our approach integrates Time-Integrated Deep Operator Networks (TI-DeepONets) as differentiable PDE surrogate models within the Differentiable Predictive Control (DPC)-a self-supervised learning framework for constrained neural control policies. The TI-DeepONet architecture learns temporal derivatives and couples them with numerical integrators, while the DPC algorithm uses automatic differentiation to compute policy gradients by backpropagating the expectations of the optimal control loss through the learned TI-DeepONet. This approach enables efficient offline optimization of neural policies without the need for online optimization or supervisory controllers. We empirically demonstrate the proposed method across diverse PDE systems, including the heat, the nonlinear Burgers', and the reaction-diffusion equations. The learned policies achieve target tracking, constraint satisfaction, and curvature minimization objectives, while generalizing across distributions of initial conditions and parameters. Moreover, we demonstrate four orders of magnitude acceleration at inference time compared to nonlinear model predictive control benchmarks. These results highlight the promise of operator learning for scalable model-based control of PDEs.

Accurate dynamics models are critical for informed decision-making in robotic systems, particularly for agile aerial vehicles operating under uncertainty. Neural network dynamics models are attractive for capturing complex nonlinear effects, but existing predictive approaches struggle with long-horizon forecasting because their autoregressive rollout mechanism amplifies errors over time. Joint Embedding Predictive Architectures (JEPAs) offer a compelling alternative by modeling dynamics in latent space, yet prior JEPA-style methods for robot navigation have been studied primarily for kinematic-level planning, with limited investigation in high-frequency control. In this work, we introduce the JEPA-style model for real-time quadrotor control. The proposed approach combines a latent dynamics model with a novel physics-inspired prober that maps frozen latents to interpretable state, enabling physically grounded long-horizon prediction. Additionally, we combine the learned model with a sampling-based optimal control solution to take advantage of its predictive capabilities for real-time control on embedded hardware. Finally, to reduce the dependence on expensive and unsafe real-world data collection, we develop a structured pipeline for automated dataset generation. Extensive open-loop and outdoor closed-loop experiments demonstrate accurate prediction, robust zero-shot sim-to-real transfer, and strong generalization across diverse operating conditions.

Training generalist agents is difficult across several axes, requiring us to deal with high-dimensional inputs (space), long horizons (time), and generalization to novel tasks. Recent advances with architectures have allowed for improved scaling along one or two of these axes, but are still computationally prohibitive to use. In this paper, we propose to address all three axes by leveraging Language to Control Diffusion models as a hierarchical planner conditioned on language (LCD). We effectively and efficiently scale diffusion models for planning in extended temporal, state, and task dimensions to tackle long horizon control problems conditioned on natural language instructions, as a step towards generalist agents. Comparing LCD with other state-of-the-art models on the CALVIN language robotics benchmark finds that LCD outperforms other SOTA methods in multi-task success rates, whilst improving inference speed over other comparable diffusion models by 3.3x~15x. We show that LCD can successfully leverage the unique strength of diffusion models to produce coherent long range plans while addressing their weakness in generating low-level details and control.

Local loss-landscape stabilization under sample growth is typically measured either pointwise or through isotropic averaging in the full parameter space. Despite practical value, both choices probe directions that contribute little to the dominant local deformation of strongly anisotropic neural landscapes. We recast stabilization as an observational problem and introduce a unified family of criteria parameterized by an aggregation order and a probing distribution; within this family we propose a curvature-aligned criterion Δ_2^{(D)} that probes the loss increment field in the top-D eigenspace of the empirical Hessian near a trained solution. Solely from a local quadratic model, we prove that Δ_2^{(D)} preserves the O(k^{-2}) mean-squared rate of the full-space criterion while replacing ambient-dimension curvature dependence with dependence on the subspace dimension D; a corollary gives a closed-form spectral expression and a proposition identifies the top-D eigenspace as extremal within the eigenspace-aligned family. We also derive scalable estimators based on Hessian-vector products, subspace Monte Carlo, and a closed-form Gaussian-moment proxy. On a decoder-only transformer, a curvature-aligned probe occupying a tiny fraction of parameter space already reproduces the full-space mean-squared signal to within numerical noise throughout the validated local regime, and the closed-form estimator is orders of magnitude faster than direct Monte Carlo after subspace construction.

In staggered treatment-adoption designs, later-treated units are valid controls for an earlier-treated cohort only until their own treatment begins, so the admissible donor set contracts with event time. Fixing the donor pool at the longest horizon discards temporarily eligible donors, whereas re-estimating synthetic-control weights independently at each horizon can make the counterfactual unstable as donor composition changes. We propose Risk-Set Transported Synthetic Control with Difference-in-Differences Adjustment (RT-SC-DiD). For each cohort and event-time horizon, the estimator fits weights on the currently untreated donors while shrinking them toward a transported reference that reallocates the weight of exiting donors to similar surviving donors. A DiD baseline correction removes persistent level differences. We characterize distortion from horizon-by-horizon reoptimization, derive the loading change induced by naive deletion and renormalization, and give a conditional recursive bound for error propagation under an explicitly assumed regularity condition on the transport map. We also introduce donor-support diagnostics and a donor-only placebo procedure for selecting the transport penalty. In an 80-replication pilot comparison and a separate 40-replication-per-value sensitivity analysis, intermediate transport regularization reduces average RMSE relative to independent horizon-specific estimation and strong anchoring. This evidence supports the method's bias-variance motivation but is not a proved guarantee. RT-SC-DiD is intended for settings where later-treated units provide useful short-horizon information and donor support contracts materially over time. Existing staggered synthetic-control and synthetic difference-in-differences methods do not, to our knowledge, explicitly regularize within-cohort weight sequences toward transported references as risk sets contract.

Current robotic planning methods often rely on predicting multi-frame images with full pixel details. While this fine-grained approach can serve as a generic world model, it introduces two significant challenges for downstream policy learning: substantial computational costs that hinder real-time deployment, and accumulated inaccuracies that can mislead action extraction. Planning with coarse-grained subgoals partially alleviates efficiency issues. However, their forward planning schemes can still result in off-task predictions due to accumulation errors, leading to misalignment with long-term goals. This raises a critical question: Can robotic planning be both efficient and accurate enough for real-time control in long-horizon, multi-stage tasks? To address this, we propose a Latent Space Backward Planning scheme (LBP), which begins by grounding the task into final latent goals, followed by recursively predicting intermediate subgoals closer to the current state. The grounded final goal enables backward subgoal planning to always remain aware of task completion, facilitating on-task prediction along the entire planning horizon. The subgoal-conditioned policy incorporates a learnable token to summarize the subgoal sequences and determines how each subgoal guides action extraction. Through extensive simulation and real-robot long-horizon experiments, we show that LBP outperforms existing fine-grained and forward planning methods, achieving SOTA performance. Project Page: https://lbp-authors.github.io

Due to the high efficiency and less weather dependency, autonomous greenhouses provide an ideal solution to meet the increasing demand for fresh food. However, managers are faced with some challenges in finding appropriate control strategies for crop growth, since the decision space of the greenhouse control problem is an astronomical number. Therefore, an intelligent closed-loop control framework is highly desired to generate an automatic control policy. As a powerful tool for optimal control, reinforcement learning (RL) algorithms can surpass human beings' decision-making and can also be seamlessly integrated into the closed-loop control framework. However, in complex real-world scenarios such as agricultural automation control, where the interaction with the environment is time-consuming and expensive, the application of RL algorithms encounters two main challenges, i.e., sample efficiency and safety. Although model-based RL methods can greatly mitigate the efficiency problem of greenhouse control, the safety problem has not got too much attention. In this paper, we present a model-based robust RL framework for autonomous greenhouse control to meet the sample efficiency and safety challenges. Specifically, our framework introduces an ensemble of environment models to work as a simulator and assist in policy optimization, thereby addressing the low sample efficiency problem. As for the safety concern, we propose a sample dropout module to focus more on worst-case samples, which can help improve the adaptability of the greenhouse planting policy in extreme cases. Experimental results demonstrate that our approach can learn a more effective greenhouse planting policy with better robustness than existing methods.

Aerial robots can enhance construction site productivity by autonomously handling inspection and mapping tasks. However, ensuring safe navigation near human workers remains challenging. While navigation in static environments has been well studied, navigating dynamic environments remains open due to challenges in perception and planning. Payload limitations restrict the robots to using cameras with limited fields of view, resulting in unreliable perception and tracking during collision avoidance. Moreover, the rapidly changing conditions of dynamic environments can quickly make the generated optimal trajectory outdated.To address these challenges, this paper presents a comprehensive navigation framework that integrates perception, intent prediction, and planning. Our perception module detects and tracks dynamic obstacles efficiently and handles tracking loss and occlusion during collision avoidance. The proposed intent prediction module employs a Markov Decision Process (MDP) to forecast potential actions of dynamic obstacles with the possible future trajectories. Finally, a novel intent-based planning algorithm, leveraging model predictive control (MPC), is applied to generate navigation trajectories. Simulation and physical experiments demonstrate that our method improves the safety of navigation by achieving the fewest collisions compared to benchmarks.

We introduce Diffusion World Model (DWM), a conditional diffusion model capable of predicting multistep future states and rewards concurrently. As opposed to traditional one-step dynamics models, DWM offers long-horizon predictions in a single forward pass, eliminating the need for recursive quires. We integrate DWM into model-based value estimation, where the short-term return is simulated by future trajectories sampled from DWM. In the context of offline reinforcement learning, DWM can be viewed as a conservative value regularization through generative modeling. Alternatively, it can be seen as a data source that enables offline Q-learning with synthetic data. Our experiments on the D4RL dataset confirm the robustness of DWM to long-horizon simulation. In terms of absolute performance, DWM significantly surpasses one-step dynamics models with a 44% performance gain, and achieves state-of-the-art performance.

The accurate modeling of dynamics in interactive environments is critical for successful long-range prediction. Such a capability could advance Reinforcement Learning (RL) and Planning algorithms, but achieving it is challenging. Inaccuracies in model estimates can compound, resulting in increased errors over long horizons. We approach this problem from the lens of Koopman theory, where the nonlinear dynamics of the environment can be linearized in a high-dimensional latent space. This allows us to efficiently parallelize the sequential problem of long-range prediction using convolution while accounting for the agent's action at every time step. Our approach also enables stability analysis and better control over gradients through time. Taken together, these advantages result in significant improvement over the existing approaches, both in the efficiency and the accuracy of modeling dynamics over extended horizons. We also show that this model can be easily incorporated into dynamics modeling for model-based planning and model-free RL and report promising experimental results.

Vision-language models (VLMs) have been widely-applied in ground-based vision-language navigation (VLN). However, the vast complexity of outdoor aerial environments compounds data acquisition challenges and imposes long-horizon trajectory planning requirements on Unmanned Aerial Vehicles (UAVs), introducing novel complexities for aerial VLN. To address these challenges, we propose a data-efficient Open-world aerial Vision-Language Navigation (i.e., OpenVLN) framework, which could execute language-guided flight with limited data constraints and enhance long-horizon trajectory planning capabilities in complex aerial environments. Specifically, we reconfigure a reinforcement learning framework to optimize the VLM for UAV navigation tasks, which can efficiently fine-tune VLM by using rule-based policies under limited training data. Concurrently, we introduce a long-horizon planner for trajectory synthesis that dynamically generates precise UAV actions via value-based rewards. To the end, we conduct sufficient navigation experiments on the TravelUAV benchmark with dataset scaling across diverse reward settings. Our method demonstrates consistent performance gains of up to 4.34% in Success Rate, 6.19% in Oracle Success Rate, and 4.07% in Success weighted by Path Length over baseline methods, validating its deployment efficacy for long-horizon UAV navigation in complex aerial environments.

Inference-time guided sampling steers state-of-the-art diffusion and flow models without fine-tuning by interpreting the generation process as a controllable trajectory. This provides a simple and flexible way to inject external constraints (e.g., cost functions or pre-trained verifiers) for controlled generation. However, existing methods often fail when composing multiple constraints simultaneously, which leads to deviations from the true data manifold. In this work, we identify root causes of this off-manifold drift and find that the approximation error scales severely with gradient misalignment. Building on these findings, we propose Conflict-Aware Additive Guidance (g^car), a lightweight and learnable method, which actively rectifies off-manifold drift by dynamically detecting and resolving gradient conflicts. We validate g^car across diverse domains, ranging from synthetic datasets and image editing to generative decision-making for planning and control. Our results demonstrate that g^car effectively rectifies off-manifold drift, surpassing baselines in generation fidelity while using light compute. Code is available at https://github.com/yuxuehui/CAR-guidance.

A latent world model may achieve accurate short-horizon prediction while still inducing a latent space that is poorly aligned with planning. A key issue is spatiotemporal mismatch: these models are often trained with local predictive supervision, but deployed for long-horizon goal-directed search in latent spaces where Euclidean distance may not reflect what is reachable within a finite action budget. We present the Reachability-Correction auxiliary objective (RC-aux), a lightweight correction for this mismatch in reconstruction-free latent world models. RC-aux keeps the world-model backbone unchanged and adds planning-aligned supervision along two axes. Along the time axis, multi-horizon open-loop prediction trains the model beyond one-step consistency. Along the space axis, budget-conditioned reachability supervision, together with temporal hard negatives, encourages the latent space to distinguish states that are eventually reachable from those reachable within the current planning horizon. At test time, the learned reachability signal can also be used by a reachability-aware planner to favor trajectories that are both goal-directed and attainable under the available budget. We instantiate RC-aux on LeWorldModel and evaluate it under both continuation-training and matched-from-scratch settings. Across goal-conditioned pixel-control tasks and a LIBERO-Goal extension, RC-aux improves LeWM-style planning with modest additional cost. These results suggest that planning with latent world models depends not only on predictive accuracy, but also on whether the learned representation encodes the temporal and geometric structure required by downstream search. The code is available at https://github.com/Guang000/RC-aux.

Existing methods for optimal control struggle to deal with the complexity commonly encountered in real-world systems, including dimensionality, process error, model bias and data heterogeneity. Instead of tackling these system complexities directly, researchers have typically sought to simplify models to fit optimal control methods. But when is the optimal solution to an approximate, stylized model better than an approximate solution to a more accurate model? While this question has largely gone unanswered owing to the difficulty of finding even approximate solutions for complex models, recent algorithmic and computational advances in deep reinforcement learning (DRL) might finally allow us to address these questions. DRL methods have to date been applied primarily in the context of games or robotic mechanics, which operate under precisely known rules. Here, we demonstrate the ability for DRL algorithms using deep neural networks to successfully approximate solutions (the "policy function" or control rule) in a non-linear three-variable model for a fishery without knowing or ever attempting to infer a model for the process itself. We find that the reinforcement learning agent discovers an effective simplification of the problem to obtain an interpretable control rule. We show that the policy obtained with DRL is both more profitable and more sustainable than any constant mortality policy -- the standard family of policies considered in fishery management.

A recent line of works showed regret bounds in reinforcement learning (RL) can be (nearly) independent of planning horizon, a.k.a.~the horizon-free bounds. However, these regret bounds only apply to settings where a polynomial dependency on the size of transition model is allowed, such as tabular Markov Decision Process (MDP) and linear mixture MDP. We give the first horizon-free bound for the popular linear MDP setting where the size of the transition model can be exponentially large or even uncountable. In contrast to prior works which explicitly estimate the transition model and compute the inhomogeneous value functions at different time steps, we directly estimate the value functions and confidence sets. We obtain the horizon-free bound by: (1) maintaining multiple weighted least square estimators for the value functions; and (2) a structural lemma which shows the maximal total variation of the inhomogeneous value functions is bounded by a polynomial factor of the feature dimension.

Ensuring safety and meeting temporal specifications are critical challenges for long-term robotic tasks. Signal temporal logic (STL) has been widely used to systematically and rigorously specify these requirements. However, traditional methods of finding the control policy under those STL requirements are computationally complex and not scalable to high-dimensional or systems with complex nonlinear dynamics. Reinforcement learning (RL) methods can learn the policy to satisfy the STL specifications via hand-crafted or STL-inspired rewards, but might encounter unexpected behaviors due to ambiguity and sparsity in the reward. In this paper, we propose a method to directly learn a neural network controller to satisfy the requirements specified in STL. Our controller learns to roll out trajectories to maximize the STL robustness score in training. In testing, similar to Model Predictive Control (MPC), the learned controller predicts a trajectory within a planning horizon to ensure the satisfaction of the STL requirement in deployment. A backup policy is designed to ensure safety when our controller fails. Our approach can adapt to various initial conditions and environmental parameters. We conduct experiments on six tasks, where our method with the backup policy outperforms the classical methods (MPC, STL-solver), model-free and model-based RL methods in STL satisfaction rate, especially on tasks with complex STL specifications while being 10X-100X faster than the classical methods.

In this work, we investigate the data-driven safe control synthesis problem for unknown dynamic systems. We first formulate the safety synthesis problem as a robust convex program (RCP) based on notion of control barrier function. To resolve the issue of unknown system dynamic, we follow the existing approach by converting the RCP to a scenario convex program (SCP) by randomly collecting finite samples of system trajectory. However, to improve the sample efficiency to achieve a desired confidence bound, we provide a new posteriori method with validation tests. Specifically, after collecting a set of data for the SCP, we further collect another set of independent validate data as posterior information to test the obtained solution. We derive a new overall confidence bound for the safety of the controller that connects the original sample data, the support constraints, and the validation data. The efficiency of the proposed approach is illustrated by a case study of room temperature control. We show that, compared with existing methods, the proposed approach can significantly reduce the required number of sample data to achieve a desired confidence bound.

Optimisation-based parking planners usually impose collision constraints only at the time samples, so a vehicle corner can cut an obstacle between samples, and no executable trajectory exists until the solver converges. We present a planner for car-like vehicles with reverse gear in which every iterate of the optimisation phase satisfies the discretised dynamics exactly and keeps the whole vehicle rectangle clear of obstacles between the samples. Each time interval receives one convex corridor that holds all vehicle corners at both ends and is shrunk by a sweep margin bounding how far the corner paths leave their chords. Separating half-planes give the corridors a direction out of obstacles when the initial guess is in collision; later, heading-aligned boxes are grown from the speed, curvature and step of the current iterate and rebuilt after accepted steps. A feasibility-perturbed trust-region sequential quadratic programming method projects each step onto the dynamics by feedback and verifies it exactly; the cost decreases monotonically, and once the corridors stop changing, limit points are Karush-Kuhn-Tucker points of the corridor-constrained problem or violate a constraint qualification. On 820 benchmark cases the planner succeeds in 818 without penetration (797 from the first initial guess), none of the 7103 evaluated optimisation-phase iterates is unusable, and it succeeds in 96.5% of the cases when 99% of the initial guesses intersect an obstacle. Its maneuvers take 0.7% longer in the median than those of a similarly certified exact-collision baseline. The guarantees hold for the planning model, not for a physical vehicle.

Large Language Models have demonstrated remarkable abilities in reasoning and planning by breaking down complex problems into sequential steps. Despite their success in various domains like mathematical problem-solving and coding, LLMs face challenges in ensuring reliable and optimal planning due to their inherent myopic nature of autoregressive decoding. This paper revisits LLM reasoning from an optimal-control perspective, proposing a novel method, Predictive-Decoding, that leverages Model Predictive Control to enhance planning accuracy. By re-weighting LLM distributions based on foresight trajectories, Predictive-Decoding aims to mitigate early errors and promote non-myopic planning. Our experiments show significant improvements in a wide range of tasks for math, coding, and agents. Furthermore, Predictive-Decoding demonstrates computational efficiency, outperforming search baselines with reduced computational resources. This study provides insights into optimizing LLM planning capabilities.

Recently, learning-based controllers have been shown to push mobile robotic systems to their limits and provide the robustness needed for many real-world applications. However, only classical optimization-based control frameworks offer the inherent flexibility to be dynamically adjusted during execution by, for example, setting target speeds or actuator limits. We present a framework to overcome this shortcoming of neural controllers by conditioning them on an auxiliary input. This advance is enabled by including a feature-wise linear modulation layer (FiLM). We use model-free reinforcement-learning to train quadrotor control policies for the task of navigating through a sequence of waypoints in minimum time. By conditioning the policy on the maximum available thrust or the viewing direction relative to the next waypoint, a user can regulate the aggressiveness of the quadrotor's flight during deployment. We demonstrate in simulation and in real-world experiments that a single control policy can achieve close to time-optimal flight performance across the entire performance envelope of the robot, reaching up to 60 km/h and 4.5g in acceleration. The ability to guide a learned controller during task execution has implications beyond agile quadrotor flight, as conditioning the control policy on human intent helps safely bringing learning based systems out of the well-defined laboratory environment into the wild.

Trajectory planning is commonly used as part of a local planner in autonomous driving. This paper considers the problem of planning a continuous-curvature-rate trajectory between fixed start and goal states that minimizes a tunable trade-off between passenger comfort and travel time. The problem is an instance of infinite dimensional optimization over two continuous functions: a path, and a velocity profile. We propose a simplification of this problem that facilitates the discretization of both functions. This paper also proposes a method to quickly generate minimal-length paths between start and goal states based on a single tuning parameter: the second derivative of curvature. Furthermore, we discretize the set of velocity profiles along a given path into a selection of acceleration way-points along the path. Gradient-descent is then employed to minimize cost over feasible choices of the second derivative of curvature, and acceleration way-points, resulting in a method that repeatedly solves the path and velocity profiles in an iterative fashion. Numerical examples are provided to illustrate the benefits of the proposed methods.

Swarm aerial robots are required to maintain close proximity to successfully traverse narrow areas in cluttered environments. However, this movement is affected by the downwash effect generated from other quadrotors in the swarm. This aerodynamic effect is highly nonlinear and hard to describe through mathematical modeling. Additionally, the existence of the downwash disturbance can be predicted based on the states of neighboring quadrotors. If this prediction is considered, the control loop can proactively handle the disturbance, resulting in improved performance. To address these challenges, we propose an approach that integrates a Neural network Downwash Predictor with Nonlinear Model Predictive Control (NDP-NMPC). The neural network is trained with spectral normalization to ensure robustness and safety in uncollected cases. The predicted disturbances are then incorporated into the optimization scheme in NMPC, which enforces constraints to ensure that states and inputs remain within safe limits. We also design a quadrotor system, identify its parameters, and implement the proposed method on board. Finally, we conduct a prediction experiment to validate the safety and effectiveness of the network. In addition, a real-time trajectory tracking experiment is performed with the entire system, demonstrating a 75.37% reduction in tracking error in height under the downwash effect.

Density of the reachable states can help understand the risk of safety-critical systems, especially in situations when worst-case reachability is too conservative. Recent work provides a data-driven approach to compute the density distribution of autonomous systems' forward reachable states online. In this paper, we study the use of such approach in combination with model predictive control for verifiable safe path planning under uncertainties. We first use the learned density distribution to compute the risk of collision online. If such risk exceeds the acceptable threshold, our method will plan for a new path around the previous trajectory, with the risk of collision below the threshold. Our method is well-suited to handle systems with uncertainties and complicated dynamics as our data-driven approach does not need an analytical form of the systems' dynamics and can estimate forward state density with an arbitrary initial distribution of uncertainties. We design two challenging scenarios (autonomous driving and hovercraft control) for safe motion planning in environments with obstacles under system uncertainties. We first show that our density estimation approach can reach a similar accuracy as the Monte-Carlo-based method while using only 0.01X training samples. By leveraging the estimated risk, our algorithm achieves the highest success rate in goal reaching when enforcing the safety rate above 0.99.

Vessel transit in ice-covered waters poses unique challenges in safe and efficient motion planning. When the concentration of ice is high, it may not be possible to find collision-free trajectories. Instead, ice can be pushed out of the way if it is small or if contact occurs near the edge of the ice. In this work, we propose a real-time navigation framework that minimizes collisions with ice and distance travelled by the vessel. We exploit a lattice-based planner with a cost that captures the ship interaction with ice. To address the dynamic nature of the environment, we plan motion in a receding horizon manner based on updated vessel and ice state information. Further, we present a novel planning heuristic for evaluating the cost-to-go, which is applicable to navigation in a channel without a fixed goal location. The performance of our planner is evaluated across several levels of ice concentration both in simulated and in real-world experiments.

Robotic systems often exhibit unstable modes, along which small perturbations and disturbances can cause unbounded growth unless corrected through feedback. Controlling such systems from high-dimensional visual observations requires representations that preserve these modes. Joint-embedding predictive architectures (JEPAs) provide a natural framework for learning such representations and their dynamics from visual data. However, we demonstrate that next step prediction combined with anti-collapse regularization does not guarantee that controllable unstable modes are preserved: the training loss can be minimized while these modes are collapsed, making stabilization from the learned representation impossible. To address this, we augment world-model training with an action reconstruction objective (i.e., an inverse dynamics loss) that encourages control-aware representations, namely, visual representations that preserve crucial features for control. We prove that exact action reconstruction makes the encoder injective on the finite-horizon reachable subspace. Thus, the encoder cannot discard any state direction reachable by an action sequence within H steps. Moreover, we show that, as H grows, the dominant eigenspace of the finite-horizon controllability Gramian converges to the controllable unstable subspace. We establish our theoretical results for linear systems and demonstrate empirically that our findings extend to nonlinear visual control tasks (CartPole, Walker2D, and PointMaze), highlighting the benefits of control-aware representation learning.

Aligning generative flow models on continuous spaces via online reinforcement learning is constrained by intractable trajectory likelihoods. Existing density-approximated policy gradient methods rely on stochastic SDE samplers to construct tractable transition kernels, which introduce training-inference inconsistencies and necessitates Classifier-Free Guidance (CFG). While implicit frameworks such as DiffusionNFT directly optimize forward-process velocity fields, its heuristic fixed-magnitude corrections prevent optimization strength from relative intra-group quality. We propose Flow Advantage-Weighted Rectification (FlowAWR), a paradigm that recasts continuous generative policy optimization as supervised regression toward a theoretically optimal velocity field. Starting from the optimal policy of a KL-constrained reward maximization, FlowAWR derives the optimal velocity field that admits a magnitude-aware, advantage-weighted rectification form, yielding SDE-free optimization and CFG-free generation. In comparative evaluations on SD3.5-Medium, FlowAWR achieves improved alignment performance alongside a 2times to 5times convergence acceleration over DiffusionNFT (e.g., reaching a 24.12 PickScore in 1.2k steps, versus 23.82 in 2.0k steps for DiffusionNFT and 23.50 in >4k steps for FlowGRPO). Under multi-reward constraints, FlowAWR sustains generation quality, satisfying structural rules while maintaining stable out-of-domain performance.

In this work, we address the challenging problem of long-horizon goal-reaching policy learning from non-expert, action-free observation data. Unlike fully labeled expert data, our data is more accessible and avoids the costly process of action labeling. Additionally, compared to online learning, which often involves aimless exploration, our data provides useful guidance for more efficient exploration. To achieve our goal, we propose a novel subgoal guidance learning strategy. The motivation behind this strategy is that long-horizon goals offer limited guidance for efficient exploration and accurate state transition. We develop a diffusion strategy-based high-level policy to generate reasonable subgoals as waypoints, preferring states that more easily lead to the final goal. Additionally, we learn state-goal value functions to encourage efficient subgoal reaching. These two components naturally integrate into the off-policy actor-critic framework, enabling efficient goal attainment through informative exploration. We evaluate our method on complex robotic navigation and manipulation tasks, demonstrating a significant performance advantage over existing methods. Our ablation study further shows that our method is robust to observation data with various corruptions.

Human demonstrations are a scalable data source for learning dexterous manipulation, but the embodiment gap prevents human motion from being executed directly on robots. Inverse kinematics (IK) retargets human motion to robots efficiently but ignores dynamics, often producing infeasible motions. Reinforcement learning (RL) and sampling-based model predictive control (MPC) are commonly employed to yield dynamically feasible motions, but both are sample-inefficient and sensitive to hyperparameters. RL suffers from costly and unstable training and tedious reward engineering; MPC avoids policy optimization, yet retargets each trajectory in isolation, and solving one does not make the next easier. Sampling cost grows rapidly with dataset size and task difficulty. We hypothesize that dynamically feasible trajectories concentrate near a low-dimensional manifold shared across demonstrations, so that retargeting can be reduced to sampling from that manifold, conditioned on human motion, rather than solving a fresh optimization problem for every demonstration. We propose Generative Neural Retargeting (GNR), which uses a flow matching model to sample feasible trajectories. GNR outperforms MPC with only 8.5% of the samples required by MPC, achieving a success rate of 56.20% compared to 27.20% for MPC. GNR can be used for scalable and efficient retargeting of large-scale, long-horizon, and millimeter precision human demonstrations: by applying GNR within a real-to-sim data engine, we produce a dexterous manipulation dataset with dense contact-force labels, spanning 223k demonstrations and 3.3k object geometries.

Power electronic converters are becoming the main components of modern power systems due to the increasing integration of renewable energy sources. However, power converters may become unstable when interacting with the complex and time-varying power grid. In this paper, we propose an adaptive data-driven control method to stabilize power converters by using only online input-output data. Our contributions are threefold. First, we reformulate the output-feedback control problem as a state-feedback linear quadratic regulator (LQR) problem with a controllable non-minimal state, which can be constructed from past input-output signals. Second, we propose a data-enabled policy optimization (DeePO) method for this non-minimal realization to achieve efficient output-feedback adaptive control. Third, we use high-fidelity simulations to verify that the output-feedback DeePO can effectively stabilize grid-connected power converters and quickly adapt to the changes in the power grid.

This paper derives necessary optimality conditions for free end-time optimal control problems governed by sweeping process dynamics. In contrast to classical optimal control problems, the presence of the normal cone term in the state equation introduces discontinuities with respect to the state variable and prevents the standard Lipschitz regularity assumptions typically used in optimal control theory. As a result, both the analysis of trajectories and the formulation of optimality conditions require refined tools. We address problems with general endpoint constraints and time-dependent data, considering both the case in which the dynamics are Lipschitz continuous in time and the more challenging setting of merely measurable time dependence. Special attention is devoted to the additional transversality conditions associated with the free end-time variable. In the Lipschitz case, these conditions are expressed in terms of a function of bounded variation that coincides almost everywhere with the maximized Hamiltonian. In the measurable case, we show that a suitable interpretation can be obtained via the notions of sub- and super-essential values of the maximized Hamiltonian, recently introduced in the literature, leading to strengthened transversality conditions. These conditions also involve an additional term reflecting the interaction between the costate arc and the normal cone to the moving set at the optimal endpoints. Our approach combines suitable perturbation techniques with a penalization method tailored to sweeping processes. The moving set is modelled as a finite intersection of inequality-defined sets satisfying suitable constraint qualifications, including a positive linear independence condition and a diagonal dominance property of the associated Gramian matrix. We also introduce a local version of the constraint qualification condition. Our results apply to a broad class of problems, including those involving unbounded moving sets such as polyhedra. The resulting optimality system extends and sharpens recent results for classical free end-time problems to the non-Lipschitz, discontinuous framework of sweeping processes. The relevance of the transversality conditions obtained in this article is illustrated through two simple examples.

The control of high-dimensional systems, such as soft robots, requires models that faithfully capture complex dynamics while remaining computationally tractable. This work presents a framework that integrates Graph Neural Network (GNN)-based dynamics models with structure-exploiting Model Predictive Control to enable real-time control of high-dimensional systems. By representing the system as a graph with localized interactions, the GNN preserves sparsity, while a tailored condensing algorithm eliminates state variables from the control problem, ensuring efficient computation. The complexity of our condensing algorithm scales linearly with the number of system nodes, and leverages Graphics Processing Unit (GPU) parallelization to achieve real-time performance. The proposed approach is validated in simulation and experimentally on a physical soft robotic trunk. Results show that our method scales to systems with up to 1,000 nodes at 100 Hz in closed-loop, and demonstrates real-time reference tracking on hardware with sub-centimeter accuracy, outperforming baselines by 63.6%. Finally, we show the capability of our method to achieve effective full-body obstacle avoidance.

This paper presents a computationally efficient approach for robust Model Predictive Control of nonlinear systems by combining Random Fourier Features with tube-based MPC. Tube-based Model Predictive Control provides robust constraint satisfaction under bounded model uncertainties arising from approximation errors and external disturbances. The Random Fourier Features method approximates nonlinear system dynamics by solving a numerically tractable least-squares problem, thereby reducing the approximation error. We develop the integration of RFF-based residual learning with tube MPC and demonstrate its application to an autonomous vehicle path-tracking problem using a nonlinear bicycle model. Compared to the linear baseline, the proposed method reduces the tube size by approximately 50%, leading to less conservative behavior and resulting in around 70% smaller errors in the test scenario. Furthermore, the proposed method achieves real-time performance while maintaining provable robustness guarantees.

In this paper, we explore the capabilities of state-of-the-art large language models (LLMs) such as GPT-4, Claude 3 Opus, and Gemini 1.0 Ultra in solving undergraduate-level control problems. Controls provides an interesting case study for LLM reasoning due to its combination of mathematical theory and engineering design. We introduce ControlBench, a benchmark dataset tailored to reflect the breadth, depth, and complexity of classical control design. We use this dataset to study and evaluate the problem-solving abilities of these LLMs in the context of control engineering. We present evaluations conducted by a panel of human experts, providing insights into the accuracy, reasoning, and explanatory prowess of LLMs in control engineering. Our analysis reveals the strengths and limitations of each LLM in the context of classical control, and our results imply that Claude 3 Opus has become the state-of-the-art LLM for solving undergraduate control problems. Our study serves as an initial step towards the broader goal of employing artificial general intelligence in control engineering.

Interactive world models extend video generation from offline clip synthesis toward persistent simulation of interactive virtual worlds, enabling applications in games, robotics, embodied agents, and XR. Achieving stable long-horizon interactive generation, however, remains challenging, as the model must simultaneously preserve scene geometry, dynamic consistency, and camera control while supporting real-time autoregressive generation. Building upon Matrix-Game 3.0, we present Matrix-Game 3.5, as shown in Figure 1, which advances real-time interactive world generation toward geometry-aware and long-horizon consistent simulation through three key improvements. First, we propose a unified geometry-aware memory framework, whose patch-memory and tiled-PRoPE components introduce no additional learnable parameters, combining explicit 3D patch retrieval with projective camera conditioning to enable geometry-consistent camera control and faithful long-horizon scene recall. Second, we introduce a static-dynamic disentangled world representation that separately models static scene geometry and dynamic subjects, preserving both geometric consistency and subject identity throughout long-horizon generation. Third, we develop a two-stage progressive real-time distillation framework that converts a bidirectional diffusion model into a few-step causal generator through Perceptual Flow Matching and curriculum based Self-Rollout DMD, enabling minute-long real-time interactive generation. Extensive experiments demonstrate that, with a unified training corpus spanning Unreal simulation environments, open-world games, and internet videos, MatrixGame 3.5 achieves strong performance in long-horizon scene recall, precise camera control, subject consistency, prompt-driven world generation, and stable real-time open-world interaction.

Bidirectional thrust grants quadrotors a second equilibrium condition and increased control authority, expanding the envelope of possible aggressive maneuvers and enabling inverted flight, perching, and sensing. Prior geometric control approaches extend differential flatness through Hopf fibration-based attitude representations to support bidirectional thrust, but struggle with actuator saturation and motor reversal delay during inversions, requiring heuristic thrust posture scheduling and waypoint tuning. We propose a learning-based framework that modulates a constant reference trajectory to perform compact, position-constrained quadrotor inversions while remaining compatible with traditional trajectory generation and tracking across flight regimes. Separate policies are trained via reinforcement learning for nominal-to-inverted and inverted-to-nominal transitions. In JAX-based simulation, the proposed method achieves the lowest position deviation and settling time across all evaluated baselines, reducing position root mean square error (RMSE) by 32% and settling time by 57% relative to the strongest optimization-based baseline. Hardware experiments demonstrate successful inversion across multiple yaw configurations with position RMSE below 0.35m, and compatibility with downstream trajectory generation and control through circular flight in both regimes. Additionally, we provide an open-source implementation of the proposed framework.

Online decision-making faces a tension between efficient inference and long-horizon reasoning. Value-based methods rely on short-horizon bootstrapping that limits the propagation of long-term information, while trajectory optimization methods plan explicitly but must solve a high-dimensional optimization problem at every decision step. We propose Generative Trajectory Planning (GTP), a model-based framework that addresses this tension by learning a generative model as a proposal distribution over action sequences. Instead of optimizing sequences from scratch, GTP samples candidate sequences from a diffusion prior and refines them using learned dynamics, reward, and value models, enabling efficient trajectory-level reasoning. Across continuous control and long-horizon manipulation tasks, GTP matches or exceeds state-of-the-art model-free, diffusion-policy, and model-based baselines, and remains stable in regimes where strong baselines degrade. Our results suggest that generative models are best understood not as policies, but as structured proposal distributions for planning, offering a new perspective on how to integrate generative modeling with model-based decision-making.

Large language models (LLMs) have shown promise as interactive agents that solve tasks through extended sequences of environment interactions. While prior work has primarily focused on system-level optimizations or algorithmic improvements, the role of task horizon length in shaping training dynamics remains poorly understood. In this work, we present a systematic empirical study that examines horizon length through controlled task constructions. Specifically, we construct controlled tasks in which agents face identical decision rules and reasoning structures, but differ only in the length of action sequences required for successful completion. Our results reveal that increasing horizon length alone constitutes a training bottleneck, inducing severe training instability driven by exploration difficulties and credit assignment challenges. We demonstrate that horizon reduction is a key principle to address this limitation, stabilizing training and achieving better performance in long-horizon tasks. Moreover, we find that horizon reduction is related to stronger generalization across horizon lengths: models trained under reduced horizons generalize more effectively to longer-horizon variants at inference time, a phenomenon we refer to as horizon generalization.

Recent advances in autoregressive (AR) models have demonstrated their potential to rival diffusion models in image synthesis. However, for complex spatially-conditioned generation, current AR approaches rely on fine-tuning the pre-trained model, leading to significant training costs. In this paper, we propose the Efficient Control Model (ECM), a plug-and-play framework featuring a lightweight control module that introduces control signals via a distributed architecture. This architecture consists of context-aware attention layers that refine conditional features using real-time generated tokens, and a shared gated feed-forward network (FFN) designed to maximize the utilization of its limited capacity and ensure coherent control feature learning. Furthermore, recognizing the critical role of early-stage generation in determining semantic structure, we introduce an early-centric sampling strategy that prioritizes learning early control sequences. This approach reduces computational cost by lowering the number of training tokens per iteration, while a complementary temperature scheduling during inference compensates for the resulting insufficient training of late-stage tokens. Extensive experiments on scale-based AR models validate that our method achieves high-fidelity and diverse control over image generation, surpassing existing baselines while significantly improving both training and inference efficiency.

Neural world models coupled with model predictive control (MPC) replan at every environment step to bound accumulated prediction error, but this incurs substantial computational overhead. Reusing a cached plan reduces this overhead, yet its effectiveness depends on how prediction mismatch propagates through the local dynamics. We analyze this trade-off with a perturbation-based dynamic-regret framework and show that stale-plan penalties scale with the reuse tolerance, the accumulated mismatch since the last replanning step, and the local dynamics sensitivity. Based on this structure, we propose AdaReP, a training-free wrapper that adapts the replanning tolerance online using the current deviation from the cached rollout and a local sensitivity estimate, without modifying the learned world model or planner. Across image-space planning, latent-space control, and real-world robotic manipulation, AdaReP substantially reduces planner-side computation while maintaining comparable task performance, including over 80% fewer queries on a 50-trial physical robot study.

Optimal operation of chemical processes is vital for energy, resource, and cost savings in chemical engineering. The problem of optimal operation can be tackled with reinforcement learning, but traditional reinforcement learning methods face challenges due to hard constraints related to quality and safety that must be strictly satisfied, and the large amount of required training data. Chemical processes often cannot provide sufficient experimental data, and while detailed dynamic models can be an alternative, their complexity makes it computationally intractable to generate the needed data. Optimal control methods, such as model predictive control, also struggle with the complexity of the underlying dynamic models. Consequently, many chemical processes rely on manually defined operation recipes combined with simple linear controllers, leading to suboptimal performance and limited flexibility. In this work, we propose a novel approach that leverages expert knowledge embedded in operation recipes. By using reinforcement learning to optimize the parameters of these recipes and their underlying linear controllers, we achieve an optimized operation recipe. This method requires significantly less data, handles constraints more effectively, and is more interpretable than traditional reinforcement learning methods due to the structured nature of the recipes. We demonstrate the potential of our approach through simulation results of an industrial batch polymerization reactor, showing that it can approach the performance of optimal controllers while addressing the limitations of existing methods.

Deformable object manipulation stands as one of the most captivating yet formidable challenges in robotics. While previous techniques have predominantly relied on learning latent dynamics through demonstrations, typically represented as either particles or images, there exists a pertinent limitation: acquiring suitable demonstrations, especially for long-horizon tasks, can be elusive. Moreover, basing learning entirely on demonstrations can hamper the model's ability to generalize beyond the demonstrated tasks. In this work, we introduce a demonstration-free hierarchical planning approach capable of tackling intricate long-horizon tasks without necessitating any training. We employ large language models (LLMs) to articulate a high-level, stage-by-stage plan corresponding to a specified task. For every individual stage, the LLM provides both the tool's name and the Python code to craft intermediate subgoal point clouds. With the tool and subgoal for a particular stage at our disposal, we present a granular closed-loop model predictive control strategy. This leverages Differentiable Physics with Point-to-Point correspondence (DiffPhysics-P2P) loss in the earth mover distance (EMD) space, applied iteratively. Experimental findings affirm that our technique surpasses multiple benchmarks in dough manipulation, spanning both short and long horizons. Remarkably, our model demonstrates robust generalization capabilities to novel and previously unencountered complex tasks without any preliminary demonstrations. We further substantiate our approach with experimental trials on real-world robotic platforms. Our project page: https://qq456cvb.github.io/projects/donut.

Sampling-based algorithms are viewed as practical solutions for high-dimensional motion planning. Recent progress has taken advantage of random geometric graph theory to show how asymptotic optimality can also be achieved with these methods. Achieving this desirable property for systems with dynamics requires solving a two-point boundary value problem (BVP) in the state space of the underlying dynamical system. It is difficult, however, if not impractical, to generate a BVP solver for a variety of important dynamical models of robots or physically simulated ones. Thus, an open challenge was whether it was even possible to achieve optimality guarantees when planning for systems without access to a BVP solver. This work resolves the above question and describes how to achieve asymptotic optimality for kinodynamic planning using incremental sampling-based planners by introducing a new rigorous framework. Two new methods, Stable Sparse-RRT (SST) and SST*, result from this analysis, which are asymptotically near-optimal and optimal, respectively. The techniques are shown to converge fast to high-quality paths, while they maintain only a sparse set of samples, which makes them computationally efficient. The good performance of the planners is confirmed by experimental results using dynamical systems benchmarks, as well as physically simulated robots.

Markov Decision Processes (MDPs) are a formal framework for modeling and solving sequential decision-making problems. In finite-time horizons such problems are relevant for instance for optimal stopping or specific supply chain problems, but also in the training of large language models. In contrast to infinite horizon MDPs optimal policies are not stationary, policies must be learned for every single epoch. In practice all parameters are often trained simultaneously, ignoring the inherent structure suggested by dynamic programming. This paper introduces a combination of dynamic programming and policy gradient called dynamic policy gradient, where the parameters are trained backwards in time. For the tabular softmax parametrisation we carry out the convergence analysis for simultaneous and dynamic policy gradient towards global optima, both in the exact and sampled gradient settings without regularisation. It turns out that the use of dynamic policy gradient training much better exploits the structure of finite-time problems which is reflected in improved convergence bounds.

With advances in imitation learning (IL) and large-scale driving datasets, end-to-end autonomous driving (E2E-AD) has made great progress recently. Currently, IL-based methods have become a mainstream paradigm: models rely on standard driving behaviors given by experts, and learn to minimize the discrepancy between their actions and expert actions. However, this objective of "only driving like the expert" suffers from limited generalization: when encountering rare or unseen long-tail scenarios outside the distribution of expert demonstrations, models tend to produce unsafe decisions in the absence of prior experience. This raises a fundamental question: Can an E2E-AD system make reliable decisions without any expert action supervision? Motivated by this, we propose a unified framework named Risk-aware World Model Predictive Control (RaWMPC) to address this generalization dilemma through robust control, without reliance on expert demonstrations. Practically, RaWMPC leverages a world model to predict the consequences of multiple candidate actions and selects low-risk actions through explicit risk evaluation. To endow the world model with the ability to predict the outcomes of risky driving behaviors, we design a risk-aware interaction strategy that systematically exposes the world model to hazardous behaviors, making catastrophic outcomes predictable and thus avoidable. Furthermore, to generate low-risk candidate actions at test time, we introduce a self-evaluation distillation method to distill riskavoidance capabilities from the well-trained world model into a generative action proposal network without any expert demonstration. Extensive experiments show that RaWMPC outperforms state-of-the-art methods in both in-distribution and out-of-distribution scenarios, while providing superior decision interpretability.

Joint Embedding Predictive Architectures (JEPAs) have shown promising world modeling capabilities, enabling planning in latent space by optimizing action trajectories using methods like the Cross-Entropy Method (CEM). These methods are, however, too computationally expensive and ineffective for long-horizon planning. Furthermore, these methods typically require an explicit image of the goal state, which is not always possible in real-world tasks. In this work, we tackle these limitations by proposing Forward-Forward-JEPA (FF-JEPA), a hierarchical approach leveraging two forward dynamics models. Alongside a standard action-conditioned forward model, we introduce an action-free latent planner that predicts the next subgoal given the current state. This approach removes the need for goal images and enables long-horizon planning by decomposing complex trajectories into a sequence of tractable, short-term optimization problems. Preliminary results on PushT demonstrate that FF-JEPA successfully overcomes flat world models' long-horizon collapse, highlighting this approach as a promising direction for goal-free planning.

This paper reinterprets the Synthetic Control (SC) framework through the lens of weighting philosophy, arguing that the contrast between traditional SC and Difference-in-Differences (DID) reflects two distinct modeling mindsets: sparse versus dense weighting schemes. Rather than viewing sparsity as inherently superior, we treat it as a modeling choice simple but potentially fragile. We propose an L-infinity-regularized SC method that combines the strengths of both approaches. Like DID, it employs a denser weighting scheme that distributes weights more evenly across control units, enhancing robustness and reducing overreliance on a few control units. Like traditional SC, it remains flexible and data-driven, increasing the likelihood of satisfying the parallel trends assumption while preserving interpretability. We develop an interior point algorithm for efficient computation, derive asymptotic theory under weak dependence, and demonstrate strong finite-sample performance through simulations and real-world applications.

Autonomous systems often must predict the motions of nearby agents from partial and noisy data. This paper asks and answers the question: "can we learn, in real-time, a nonlinear predictive model of another agent's motions?" Our online framework denoises and forecasts such dynamics using a modified sliding-window Hankel Dynamic Mode Decomposition (Hankel-DMD). Partial noisy measurements are embedded into a Hankel matrix, while an associated Page matrix enables singular-value hard thresholding (SVHT) to estimate the effective rank. A Cadzow projection enforces structured low-rank consistency, yielding a denoised trajectory and local noise variance estimates. From this representation, a time-varying Hankel-DMD lifted linear predictor is constructed for multi-step forecasts. The residual analysis provides variance-tracking signals that can support downstream estimators and risk-aware planning. We validate the approach in simulation under Gaussian and heavy-tailed noise, and experimentally on a dynamic crane testbed. Results show that the method achieves stable variance-aware denoising and short-horizon prediction suitable for integration into real-time control frameworks.

Wasserstein gradient flow extends gradient descent to probability measures. Its Hessian-guided perturbed variant (PWGF) adds Gaussian perturbations to escape saddle points in nonconvex problems. We investigate when its approximation by finitely many interacting particles remains accurate over growing time horizons. Our analysis retains the curvature accumulated along the population-driven reference path: negative curvature can amplify approximation errors, while subsequent positive curvature can damp their influence. This captures favorable scenarios in which temporary instability is compatible with accurate tracking over growing horizons. Under regularity assumptions and a prescribed common perturbation schedule, we prove particle and objective-value tracking bounds on a high-probability event for reference paths satisfying explicit conditions on accumulated curvature. To handle state-dependent Gaussian jumps, we construct a population-first coupling that preserves the reference particles' conditional independence and reduces jump errors to covariance comparison. We verify the conditions in a variance-plus-cosine model, where curvature recovery yields a growing-horizon tracking guarantee. We also establish local attraction, transverse descent, and positive second variation in two regions of a regularized matrix-factorization model, motivating a positive-negative-positive curvature pattern.

This paper presents a robust, distributed algorithm to solve general linear programs. The algorithm design builds on the characterization of the solutions of the linear program as saddle points of a modified Lagrangian function. We show that the resulting continuous-time saddle-point algorithm is provably correct but, in general, not distributed because of a global parameter associated with the nonsmooth exact penalty function employed to encode the inequality constraints of the linear program. This motivates the design of a discontinuous saddle-point dynamics that, while enjoying the same convergence guarantees, is fully distributed and scalable with the dimension of the solution vector. We also characterize the robustness against disturbances and link failures of the proposed dynamics. Specifically, we show that it is integral-input-to-state stable but not input-to-state stable. The latter fact is a consequence of a more general result, that we also establish, which states that no algorithmic solution for linear programming is input-to-state stable when uncertainty in the problem data affects the dynamics as a disturbance. Our results allow us to establish the resilience of the proposed distributed dynamics to disturbances of finite variation and recurrently disconnected communication among the agents. Simulations in an optimal control application illustrate the results.

This study focuses on operational control strategies for a multi-energy District Heating Network (DHN). Two control strategies are investigated and compared: (i) a reactive rule-based control (RBC) and (ii) a model predictive control (MPC). For the purpose of the study a small scale district heating network is modelled using Modelica. The production plant combines a heat pump, a gas boiler and a thermal solar field on the production side with a storage tank for flexibility purposes. On the consumption side, the virtual buildings are aggregated into a single consumer. We use our co-simulation and control platform, called Pegase, to implement the studied strategies. For both strategies the goal is to meet the consumers' demand while satisfying technical constraints. In addition MPC has the objective to minimize the operational costs, taking into account variable electricity prices and availability of solar thermal resource. Different scenarios are also defined and compared to study the effect of the heat plant sizing and forecasting error. The operational cost is reduced when switching from RBC to a MPC. As can be expected, MPC is more efficient when dealing with variable energy costs, intermittent solar energy and storage capabilities. This study also demonstrates how our tools enable an easy coupling of Modelica-based simulation with various control strategies. It especially supports the implementation and validation of complex MPC strategies in an efficient way, and yearly simulations are performed within 20 minutes.

Model Predictive Controllers (MPC) require a good model for the controlled process. In this paper I infer inductive biases about a physical system. I use these biases to derive a new neural network architecture that can model this real system that has noise and inertia. The main inductive biases exploited here are: the delayed impact of some inputs on the system and the separability between the temporal component and how the inputs interact to produce the output of a system. The inputs are independently delayed using shifted convolutional kernels. Feature interactions are modelled using a fully connected network that does not have access to temporal information. The available data and the problem setup allow the usage of Self Supervised Learning in order to train the models. The baseline architecture is an Attention based Reccurent network adapted to work with MPC like inputs. The proposed networks are faster, better at exploiting larger data volumes and are almost as good as baseline networks in terms of prediction performance. The proposed architecture family called Delay can be used in a real scenario to control systems with delayed responses with respect to its controls or inputs. Ablation studies show that the presence of delay kernels are vital to obtain any learning in proposed architecture. Code and some experimental data are available online.

Planning with learned world models combines online trajectory optimization with learned value and policy functions for high-dimensional control. Because the planner determines the experience used for learning, while the learned critic and actor in turn score and propose future plans, planning and learning form a closed feedback loop. TD-MPC is a prominent instance of this design. Recent policy-constrained variants strengthen one part of the loop by aligning the learned policy with planner behavior. We introduce PL-MPC (Planning-Learning MPC), which additionally modifies critic supervision and planner terminal-value estimation. Hybrid multi-step TD targets expose critic updates to more realized rewards before bootstrapping; disagreement-aware terminal estimates reduce the influence of uncertain critic values during MPPI planning; and return-weighted actor distillation emphasizes planner-executed actions from high-return episodes. The world-model architecture and MPPI optimizer are otherwise unchanged. On HumanoidBench, the largest gains occur on balance-hard, where Total Average Return (TAR) increases from 98pm18 to 387pm255, and hurdle, from 199pm13 to 466pm200; performance across the broader benchmark remains task dependent, and PL-MPC remains competitive on DMControl. Controlled ablations show different component interactions across the two tasks. We further demonstrate zero-shot sim-to-real transfer on wrench-nut alignment with a 7-DoF KUKA IIWA14, obtaining higher observed success than TD-M(PC)^2 on the training object size and two unseen sizes. Code and data will be available at: https://pl-mpc-humanoid.github.io.

Recent advancements in parallel simulation and successful robotic applications are spurring a resurgence in sampling-based model predictive control. To build on this progress, however, the robotics community needs common tooling for prototyping, evaluating, and deploying sampling-based controllers. We introduce Judo, a software package designed to address this need. To facilitate rapid prototyping and evaluation, Judo provides robust implementations of common sampling-based MPC algorithms and standardized benchmark tasks. It further emphasizes usability with simple but extensible interfaces for controller and task definitions, asynchronous execution for straightforward simulation-to-hardware transfer, and a highly customizable interactive GUI for tuning controllers interactively. While written in Python, the software leverages MuJoCo as its physics backend to achieve real-time performance, which we validate across both consumer and server-grade hardware. Code at https://github.com/bdaiinstitute/judo.

Data-driven surrogate models improve the efficiency of simulating continuous dynamical systems, yet their autoregressive rollouts are often limited by instability and spectral blow-up. While global regularization techniques can enforce contractive dynamics, they uniformly damp high-frequency features, introducing a contraction-dissipation dilemma. Furthermore, long-horizon trajectory optimization methods that explicitly correct drift are bottlenecked by memory constraints. In this work, we propose Jacobian-Adaptive Weighting for Stability (JAWS), a probabilistic regularization strategy designed to mitigate these limitations. By framing operator learning as Maximum A Posteriori (MAP) estimation with spatially heteroscedastic uncertainty, JAWS dynamically modulates the regularization strength based on local physical complexity. This allows the model to enforce contraction in smooth regions to suppress noise, while relaxing constraints near singular features to preserve gradients, effectively realizing a behavior similar to numerical shock-capturing schemes. Experiments demonstrate that this spatially-adaptive prior serves as an effective spectral pre-conditioner, which reduces the base operator's burden of handling high-frequency instabilities. This reduction enables memory-efficient, short-horizon trajectory optimization to match or exceed the long-term accuracy of long-horizon baselines. Evaluated on the 1D viscous Burgers' equation, our hybrid approach improves long-term stability, shock fidelity, and out-of-distribution generalization while reducing training computational costs.

Interactive world models require responding in real time to versatile controls and maintaining long-horizon consistency. However, modeling heterogeneous controls remains difficult, while explosive contexts and unstable distillation impede achieving both long-horizon consistency and real-time responsiveness. In this paper, we present WorldPlay2, an interactive world model that couples a factorized hybrid control interface with a co-design of compressed memory and stable distillation. 1) Our factorized hybrid control interface integrates frame-aligned action control with structured semantic control that explicitly disentangles scene appearance, character identity, and dynamic semantic events, thereby facilitating effective control learning. 2) To achieve efficient long-horizon modeling, we compress historical contexts into compact memory tokens shared by the autoregressive student and the bidirectional teacher. This design enables clip-wise, memory-conditioned score evaluation instead of jointly processing an entire long rollout, substantially reducing distillation overhead. 3) We further propose Stable Forcing, which initializes the autoregressive student via a few-step strategy and leverages full-rollout replay to preserve the quality of long-horizon rollouts, ensuring robust and stable distillation. Extensive experiments demonstrate the strong generalizability of our model and its superior performance compared to existing methods.

We analytically solve the Mountain Car problem, a canonical benchmark in RL, and derive an optimal control solution, closing a gap after 36 years. This enables us to reveal two surprising insights: The optimal control is quite simple, yet modern RL agents display a large gap to optimality. Motivated by the analysis of the optimal control, we introduce Chebyshev policies as a universal (i.e. dense) class of RL policies from first principles. They can be trained as drop-in replacements of neural nets, reducing the regret by a factor of 4.18, while requiring 277 times fewer parameters, fostering sample efficiency, explainability and realtime capability. Chebyshev policies are evaluated on further RL tasks, including a real-world nonlinear motion control testbed. They consistently improve performance over neural nets with PPO, ARS and REINFORCE. Our results demonstrate how Chebyshev policies offer a compelling and lightweight alternative or addition to neural nets for low-dimensional control tasks.

Different research lines use the term world model in different ways, yet they share a common aim: to capture how the world evolves under action in a form that supports perception, simulation, and planning. Two prominent realizations are neural predictors that learn dynamics in continuous vector spaces, and hand-built physics engines that expose explicit state and physical laws. Neural predictors scale from data but leave the form of the dynamics implicit; physics engines are inspectable and editable but difficult to construct at scale. We introduce VisualPatchWorld (VPW), which represents world dynamics as code. VPW first selects a qualitative dynamical form with short active probes, then fits that form's free parameters from recorded state-action traces by minimizing multi-step prediction error. The resulting programs can be rolled forward like a simulator, inspected in source form, and used inside model-predictive control; image-derived scene graphs can supply the live state at replan time. Across comparisons with prior code-based world models, VPW attains 69.0% mean planning success and exceeds the strongest code baseline by 23.5 points. The largest gains arise when choosing the correct qualitative dynamics is essential. Under the same planner, the induced models approach ground-truth engine success on navigation and grasp-rich control; a residual gap remains for contact-rich pushing, and checking a shortlist of promising plans in the engine closes most of that gap. These results establish a practical route toward automatically constructed code world models that are useful for planning. Code is available at https://github.com/HKBU-KnowComp/VisualPatchWorld/.

Classifier-free guidance (CFG) is the workhorse for steering large diffusion models toward text-conditioned targets, yet its native application to rectified flow (RF) based models provokes severe off-manifold drift, yielding visual artifacts, text misalignment, and brittle behaviour. We present Rectified-CFG++, an adaptive predictor-corrector guidance that couples the deterministic efficiency of rectified flows with a geometry-aware conditioning rule. Each inference step first executes a conditional RF update that anchors the sample near the learned transport path, then applies a weighted conditional correction that interpolates between conditional and unconditional velocity fields. We prove that the resulting velocity field is marginally consistent and that its trajectories remain within a bounded tubular neighbourhood of the data manifold, ensuring stability across a wide range of guidance strengths. Extensive experiments on large-scale text-to-image models (Flux, Stable Diffusion 3/3.5, Lumina) show that Rectified-CFG++ consistently outperforms standard CFG on benchmark datasets such as MS-COCO, LAION-Aesthetic, and T2I-CompBench. Project page: https://rectified-cfgpp.github.io/

Diffusion models have greatly improved visual generation but are hindered by slow generation speed due to the computationally intensive nature of solving generative ODEs. Rectified flow, a widely recognized solution, improves generation speed by straightening the ODE path. Its key components include: 1) using the diffusion form of flow-matching, 2) employing boldsymbol v-prediction, and 3) performing rectification (a.k.a. reflow). In this paper, we argue that the success of rectification primarily lies in using a pretrained diffusion model to obtain matched pairs of noise and samples, followed by retraining with these matched noise-sample pairs. Based on this, components 1) and 2) are unnecessary. Furthermore, we highlight that straightness is not an essential training target for rectification; rather, it is a specific case of flow-matching models. The more critical training target is to achieve a first-order approximate ODE path, which is inherently curved for models like DDPM and Sub-VP. Building on this insight, we propose Rectified Diffusion, which generalizes the design space and application scope of rectification to encompass the broader category of diffusion models, rather than being restricted to flow-matching models. We validate our method on Stable Diffusion v1-5 and Stable Diffusion XL. Our method not only greatly simplifies the training procedure of rectified flow-based previous works (e.g., InstaFlow) but also achieves superior performance with even lower training cost. Our code is available at https://github.com/G-U-N/Rectified-Diffusion.

A control technique is developed via Reinforcement Learning that allows arbitrary controlling of the position of an acoustic cavitation bubble in a dual-frequency standing acoustic wave field. The agent must choose the optimal pressure amplitude values to manipulate the bubble position in the range of x/lambda_0in[0.05, 0.25]. To train the agent an actor-critic off-policy algorithm (Deep Deterministic Policy Gradient) was used that supports continuous action space, which allows setting the pressure amplitude values continuously within 0 and 1, bar. A shaped reward function is formulated that minimizes the distance between the bubble and the target position and implicitly encourages the agent to perform the position control within the shortest amount of time. In some cases, the optimal control can be 7 times faster than the solution expected from the linear theory.

Motion planning under dynamics constraints, i.e., kinodynamic planning, enables safe robot operation by generating dynamically feasible trajectories that the robot can accurately track. For high-\dof robots such as manipulators, sampling-based motion planners are commonly used, especially for complex tasks in cluttered environments. However, enforcing constraints on robot dynamics in such planners requires solving either challenging two-point boundary value problems (BVPs) or propagating robot dynamics over time, both of which are computational bottlenecks that drastically increase planning times. Meanwhile, recent efforts have shown that sampling-based motion planners can generate plans in microseconds using parallelization, but are limited to geometric paths. This paper develops AkinoPDF, a fast parallelized sampling-based kinodynamic motion planning technique for a broad class of differentially flat robot systems, including manipulators, ground and aerial vehicles, and more. Differential flatness allows us to transform the motion planning problem from the original state space to a flat output space, where an analytical time-parameterized solution of the BVP and dynamics integration can be obtained. A trajectory in the flat output space is then converted back to a closed-form dynamically feasible trajectory in the original state space, enabling fast validation via ``single instruction, multiple data" parallelism. Our method is fast, exact, and compatible with any sampling-based motion planner. We extensively verify the effectiveness of our approach in both simulated benchmarks and real experiments with cluttered and dynamic environments, requiring mere microseconds to milliseconds of planning time.

Majorities of distillation methods on pre-trained diffusion models or on pre-trained rectified flow, focus on either the distillation outputs or the trajectories between random noises and clean images to speed up sample generations from pre-trained models. In those trajectory-based distillation methods, consistency distillation requires the self-consistent trajectory projection to regulate the trajectory, which might avoid the common ODE approximation error {while still be concerning about sampling efficiencies}. At the same time, rectified flow distillations enforce straight trajectory for fast sampling, although an ODE solver is still required. In this work, we propose a trajectory distillation method, \modelname, that enjoys the benefits of both and enables few-step generations. TraFlow adopts the settings of consistency trajectory models, and further enforces the properties of self-consistency and straightness throughout the entire trajectory. These two properties are pursued by reaching a balance with following three targets: (1) reconstruct the output from pre-trained models; (2) learn the amount of changes by pre-trained models; (3) satisfy the self-consistency over its trajectory. Extensive experimental results have shown the effectiveness of our proposed method.

World models are becoming central to robotic planning and control as they enable prediction of future state transitions. Existing approaches often emphasize video generation or natural-language prediction, which are difficult to ground in robot actions and suffer from compounding errors over long horizons. Classic task and motion planning models world transitions in logical space, enabling robot-executable and robust long-horizon reasoning. However, they typically operate independently of visual perception, preventing synchronized symbolic and visual state prediction. We propose a Hierarchical World Model (H-WM) that jointly predicts logical and visual state transitions within a unified framework. H-WM combines a high-level logical world model with a low-level visual world model, integrating the long-horizon robustness of symbolic reasoning with visual grounding. The hierarchical outputs provide stable intermediate guidance for long-horizon tasks, mitigating error accumulation and enabling robust execution across extended task sequences. Experiments across multiple vision-language-action (VLA) control policies demonstrate the effectiveness and generality of H-WM's guidance.

Modeling 3D scene geometry and its evolution over time is essential for autonomous driving and robotics. A common paradigm is to use world models to predict future images or latent representations of the environment and subsequently recover geometry from these predictions. However, this paradigm does not explicitly model geometric structure and typically relies on recursive rollouts to reach longer prediction horizons, leading to error accumulation and increasing computational cost. To address these limitations, we present GeoWM, a geometry world model that directly forecasts future scene geometry at specified future horizons without recursive rollout. The key idea is to leverage a geometry foundation model to transform observed RGB frames into a geometric history, which conditions a flow-matching transformer to predict the scene geometry at a specified future horizon. We further show that a lightweight camera-motion predictor can accurately estimate the future viewpoint, and that projecting the observed geometry into the predicted viewpoint provides an effective geometric prior for future geometry forecasting. Extensive experiments on four datasets spanning urban driving, aerial flight, and dynamic manipulation demonstrate that GeoWM outperforms the evaluated world models in forecasting depth, camera pose, and 3D scene geometry, while substantially reducing inference time at longer horizons.